Manual VAX Mach 4 - C91-M4 Series (page 4 of 12) (English)

540907

Zoom out

Zoom in

1/12

www.vax.co.uk

assembly / operation

3. How to Assemble

IMPORTANT: Always unplug the vacuum cleaner

from the electrical outlet before assembling or

removing the accessories.

1. Insert the flexible hose (Fig.3/1) into the inlet on the

main body of the vacuum cleaner. Making sure the

projected parts on the hose are aligned. Turn the

hose to the right until it clicks into lock position.

2. Push the telescopic extension tube on to the end of

the handle (Fig.3/2).

3. The telescopic tube can be lengthened or shortened

by pushing the button in and sliding the tube apart

or together as required (Fig.3/3).

4. Fit either the combination floor head or TurboTool

by pushing onto the extension tube (Fig.3/4).

4. How to Operate

Cord Release

Fully unwind the power cord. A yellow mark on the power

cord indicates the recommended cord length. Do not

exceed the cord length beyond the red mark.

On/off Button

1. Insert the plug into the electrical outlet.

2. Press the on/off switch located on the top of the

vacuum cleaner, to switch on the vacuum cleaner

and press the button again to turn the vacuum

cleaner off.

Carpet Cleaning

Attach the TurboBrush to the end of the extension tube.

For vacuuming large carpeted areas.

Hard Floor Cleaning

Attach the hard floor tool to the end of the extension

tube. For vacuuming parquet and laminate coverings.

Cord Rewind

To rewind the power cord, press the cord rewind button,

located on the top of the vacuum cleaner, and guide the

power cord with one hand. This will prevent the cord from

whipping which could cause damage or injury.

Carry Handle

Use the carry handle located at the rear end of the

vacuum cleaner to move from room to room.

Hose Storage

For convenience there is a parking slot located at the rear

of the vacuum cleaner where the floor tool and hose can

be parked for carrying and storage.

TurboTool

Attaches to the end of the telescopic tube or end of the

hose handle. TurboTool is used for vacuuming pet hair,

stair and upholstery cleaning.

NOTE: Do NOT use the TurboTool on suede or leather

surfaces.

Stretch hose (C91-M4-S only)

For full height stair cleaning.

IMPORTANT: This should not be used as the main

vacuum hose.

NOTE: For stair cleaning the unit should always be placed

at the bottom of the stairs.

NOTE: The stretch hose is recommended to be used for a

period of 20 minutes max.

Fig.3/1

Fig.3/2

Fig.3/3

Fig.3/4

C91-M4 Series User Guide.qxd:Vax VZL-7015(AT) User Guide 23/3/09 10:19 Page 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VAX Mach 4 - C91-M4 Series in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VAX Mach 4 - C91-M4 Series Manual

Product: