702158
14
Zoom out
Zoom in
Previous page
1/16
Next page
What to do if it goes wrong Getting in touch
Check the battery is inserted correctly into the vacuum cleaner.
Go to ‘Getting started’.
Check the handheld has been correctly tted into the main body.
Go to ‘Getting started’.
The battery may not be charged, remove and charge battery.
Check terminals on battery and vacuum cleaner are clean.
Go to ‘Lets talk technical’.
Battery might be too hot, remove and allow to cool for 30 minutes.
Replace battery.
The Motor Protection Sensor may have been activated. If this has happened,
switch o the vacuum cleaner. Remove and empty the dirt container and
check for blockages. Clean the lters and allow the vacuum cleaner to cool for
approximately 1 hour (if you have washed the lters you will need to wait 24
hours for the lters to fully dry before putting them back into the vacuum cleaner).
• Empty the dirt container and clean lters. Go to ‘Taking care of your machine’.
• There may be a blockage in the vacuum cleaner. Check the brushbar,
the nozzle of handheld, separator, shroud and tool for blockages.
• The separator has not been tted correctly. Go to ‘Taking care
of your machine’.
• The brushbar may not be turning. Go to ‘My brushbar isn’t turning?’ below.
• If the accessory/tool will not pick up, check and clear any blockages.
Go to ‘let’s talk technical’.
• The brushbar may not be switched on. Check the On/O control brush
bar roll has been turned to carpet mode. Go to ‘Using your machine’.
• The brushbar may be obstructed. Go to ‘Let’s talk technical’.
• Check the battery charger is plugged in.
• Check the battery is inserted correctly into the charger.
• Check terminals on battery and vacuum cleaner are clean.
Go to ‘Lets talk technical’.
• The battery may not be connecting with the charger. Remove battery
and unplug charger, wait 10 seconds then retry.
• The battery is fully charged and the charger light has turned o.
• The battery has not been fully charged. Go to ‘Getting started’.
• Check the battery is inserted correctly into the charger.
• The battery or charger has an error. Remove the battery and unplug charger,
wait 10 seconds then plug charger into the mains and re-insert the battery.
• Check terminals on battery and vacuum cleaner are clean.
Go to ‘Lets talk technical’.
Why does my
vacuum cleaner
have no power?
Why wont the
vacuum cleaner
pick up?
My brushbar
isn’t turning?
Why isn’t the
battery charger
light lit when
the battery
is charging?
Why does my
battery have
a short run time?
Why is the battery
charger light
continually ashing?
SolutionProblem
CAUTION: To reduce the risk of personal injury, remove the battery before performing maintenance
/troubleshooting checks.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX H85-AC21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX H85-AC21 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info