540945
4
Zoom out
Zoom in
Previous page
1/12
Next page
vax.co.uk
4
assembly / operation
3. How to Assemble
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
1. Insert the flexible hose into the inlet on the main body
of the vacuum cleaner. Push in until it clicks into
position (Fig.3/1).
2. Push the telescopic extension tube on to the end of
the handle (Fig.3/2).
3. The telescopic extension tube can be lengthened or
shortened by pushing the button in and sliding the
tube apart or together as required (Fig.3/3).
4. Fit the combination floor head
(Model: VZL-118P & PS
only)
or TurboBrush (Model: VZL-118AT, PS & C only) or
Hard Floor tool head (Model: VZL-118AT & C only) by
pushing onto the extension tube (Fig.3/4).
4. How to Operate
Cord Release
Fully unwind the power cord. A yellow mark on the power
cord indicates the recommended cord length. Do not
exceed the cord length beyond the red mark.
On/Off Button
Insert the power plug into the electrical outlet. Ensure the
vacuum cleaner is switched off.
Press the on/off button located on the top of the vacuum
cleaner and press the button again to turn the vacuum
cleaner off.
Carpet Cleaning
Model VZL-118P & PS only: For carpet and rug cleaning
press the rocker switch on the combination floor head to
raise the brushes.
Model VZL-118AT
, PS & C only: Attach the TurboBrush
floor head to the end of the extension tube. (NOTE:
TurboBrush: for pet hair, stair and large carpeted areas.
NOT recommended for hard floors.)
Hard floor cleaning
Model VZL-118P & PS only: For hard floor cleaning, press
the rocker switch on the combination floor head to lower
the brushes.
Model VZL-118AT & C only: Attach the hard floor tool
head to the end of the extension tube. (NOTE: For parquet
and laminate coverings).
TurboTool
(Model: VZL-118P & PS only):
IMPORTANT: The TurboTool connector must be
added to the handle before the TurboTool may
be attached.
for vacuuming up pet hair, stair and upholstery cleaning.
(NOTE: Do not use the TurboTool on suede and leather
surfaces).
Stretch hose (Model: VZL-118AT, PS & C only): For full
height stair cleaning (NOTE: This should not be used as the
main vacuum hose).
NOTE: For stair cleaning, the unit should always be
placed at the bottom of the stairs.
NOTE: The stretch hose is recommend to be used for a
period of 20 minutes max.
Cord Rewind
To rewind the power cord, press the cord rewind button,
located on the top of the vacuum cleaner, and guide the
power cord with one hand. This will prevent the cord from
whipping which could cause damage or injury.
Carry Handle
Use the carry handle located on the top of the machine to
move the vacuum cleaner from room to room.
Fig.3/1
Fig.3/2
Fig.3/3
Fig.3/4
!
!
Vax VZL-118 Series User Guide.qxd:04.09 24/4/09 10:06 Page 4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX Force 3 - VZL-118 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX Force 3 - VZL-118 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info