POWX4207 EN
Copyright © 2021 VARO P a g e | 8 www.varo.com
▪ If there is a short-circuit between the two terminal clamps (the metal parts of the clamps
come into contact with each other). The protection against short-circuits ensures that the
battery and charger do not get damaged.
7.8 Finishing charging the battery
▪ Pull the plug out of the socket.
▪ First disconnect the black charging cable from the bodywork.
▪ Then release the red charging cable from the positive pole on the battery.
▪ Important! In case of positive earthing, first disconnect the red charging cable from the
bodywork and then the black charging cable from the battery.
▪ Screw or push the battery stoppers back into position (if there are any).
▪ Important! If the mains plug is pulled out but the charger cables are still connected to the
battery,the charger will draw off a small amount of electricity from the battery. We
therefore recommend that you always completely remove the charger from the battery
when not in use.
8 TECHNICAL DETAILS
9 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.
