POWX153 EN
Copyright © 2020 VARO P a g e | 5 www.varo.com
▪ If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4 Power tool use and care
▪ Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
▪ Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
▪ Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
▪ Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
▪ Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
▪ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
▪ Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5 Service
▪ Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR BENCH DRILLS
▪ Only connect the machine to an earthed mains supply. Only use tree-core extension
cords.
▪ This machine must be firmly secured to a suitable workbench or other stable work surface
when selecting a suitable location for mounting this machine consideration must be given
to the maximum length of the material to be drilled or machined and the position of the
operator.
▪ Before starting the machine ensure that drills and other recommended cutting tools are
fitted correctly and that all the securing bolts are tight. Check all guards are fitted and
operating correctly and that the chuck key and any other adjustment tools have been
removed.
▪ Keep hands well away from rotating drills and other cutting tools at all times.
▪ When drilling use the correct cutting lubricant/coolant for the material being drilled. Use
only sufficient to prevent the drill from overheating and make sure that it is kept well away
from electrical components. Never use water as a coolant. Keep drills and other cutters
sharp and in good condition. This will improve cutting and reduce the load on the machine
ensuring a longer life of the cutting tools and the machine.
▪ Use only drill bits, cutters and other accessories recommended by the manufacturer.
Select the correct spindle speed for the size of drill being used. See instruction manual.
Do not attempt to modify the machine or its accessories in any way.
▪ Use approved safety glasses or goggles at all times and a face mask and ear defenders
when using for prolonged periods.
▪ Do not force the machine, let the machine do the work. This will reduce the wear on the
machine and cutter and increase its efficiency and operating life.
