POWX0562 EN
Copyright © 2019 VARO P a g e | 10 www.varo.com
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2 Handling and storage
▪ Care must be taken when handling this product.
▪ Dropping this power tool could have an effect on its accuracy and could also result in
personal injury. This product is not a toy and must be respected.
▪ Environmental conditions can have a detrimental effect on this product if neglected.
▪ Exposure to damp air can gradually corrode components.
▪ If the product is unprotected from dust and debris, components will become clogged.
▪ If not cleaned and maintained correctly or regularly the machine will not perform at its
best.
10.3 Checking and replacing the carbon brushes
The carbon brushes must be checked on a regular basis.
▪ In case of wear, replace both carbon brushes at the same time.
▪ Mount the carbon brush holders.
▪ After mounting new carbon brushes, let the machine run at no load for 15 minutes.
Use only the correct type of carbon brushes.
10.4 Lubrication
From time to time, apply a drop of oil to the thread of the lock screw.
11 TROUBLE SHOOTING
Check the fuse and replace
if necessary. Have brushes
replaced at service centre.
The saw blade is dull; the
tooth shape is not suited to
the thickness of the material.
