756780
5
Zoom out
Zoom in
Previous page
1/10
Next page
POWX04950 EN
Copyright © 2021 VARO P a g e | 5 www.varo.com
Do not work on materials containing asbestos. Asbestos is considered carcinogenic.
Warning! Toxic dust! Dust from materials such as lead paint, some types of wood,
minerals and metal, can be noxious.
Touching or inhaling this type of dust can present a danger to the user or person nearby.
Wear safety glasses and a dust mask!
Secure the work piece. Use clamps or a vice to secure the work piece. This is much safer
than holding it in your hand.
Never place your hand next to or in front of the device and the surface you are working on,
as slipping poses a risk of injury.
In the event of danger, immediately pull the mains plug out of the socket
Always run the mains cable away from the appliance and toward the rear
Avoid contact with the sanding sleeve in motion.
Do not work on moistened materials or damp surfaces.
Always apply the device to the working surface when switched on. When the task is
complete, lift the appliance off the work pieces before switching it off.
Always firmly hold the device with both hands whilst working. Ensure you have a solid
stance.
Allow the device to come to a complete stop and switch off before putting it down.
Always unplug from the mains socket before taking breaks, especially working on the
device (e.g. replacing sandpaper) and during non-use.
7 ASSEMBLY
Warning! Risk of injury! Always unplug from the mains before working on
the sanding brush.
7.1 Fitting and removing accessories (Fig. 1-2)
Press the spindle lock button.
Remove the securing screw with the hex hey.
Push the sanding accessory onto the tool holder.
Secure by refitting the securing screw.
Sanding accessories can only be fitted one way. The sanding accessory
must slide on easily. Do not attempt to force it onto the tool holder. Check
the correct direction of the sanding accessory.
Fit the sanding roller as described above.
Press the spindle lock button and turn the sander by hand until the spindle lock engages.
Turn the sanding belt anti-clockwise along with the slots on the sanding roller.
7.2 Installing the dust extraction hood (Fig. 3)
Insert the dust extraction hood (2) into the two fastening grooves (11) on the tool arm (10)
against slight resistance.
Tighten the clamping screw (4). The dust extraction hood (2) is now firmly installed on the
tool arm (10).
7.3 Adjusting the dust extraction hood (Fig. 4)
Adjust the dust extraction hood (2) so dust or sparks are not directed at the user.
The dust extraction hood (2) can cover the grinding spindle from various angles. Use the
locking grooves (12) for this purpose.
Following installation, loosen clamping screw (4) rotate the dust extraction hood (2) toward
the handle (6) according to the application and the work piece and tighten the clamping
screw (4). The dust extraction hood (2) will lock into place in several positions.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varo POWX04950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varo POWX04950 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varo POWX04950

Varo POWX04950 User Manual - German - 12 pages

Varo POWX04950 User Manual - Dutch - 10 pages

Varo POWX04950 User Manual - French - 11 pages

Varo POWX04950 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info