POWDPG80620 EN
Copyright © 2021 VARO P a g e | 8 www.varo.com
8.3 Battery capacity indicator (Fig. 3)
There are battery capacity indicators on the battery pack, you can check the capacity status of
the battery if you squeeze the button (7). Before using the machine, please press switch
trigger to check if the battery is full enough for properly working.
Those 3 LED might show the status of the capacity level of the battery:
3 LED’s are lit: Battery fully charged
2 LED’s are lit: Battery 60% charged
1 LED is lit: Battery almost discharged
9 ASSEMBLY
WARNING: Switch off and remove battery from machine before adjusting or
cleaning!
9.1 Attaching the lance (Fig. 4-5)
▪ Insert the end of the lance into the front opening of the pressure washer.
▪ Ensure when inserting, both the large tab and the small tab located on the end of the
lance are both aligned with the large and small notches located inside the front opening of
the pressure washer.
▪ Turn clockwise to lock lance into pressure washer.
▪ To remove lance from the pressure washer, press in and turn lance half a turn counter-
clockwise and pull out.
9.2 Attaching the adjustable nozzle (Fig. 6)
▪ Push the locking sleeve on the quick connect nozzle coupler on the end of the lance.
▪ While holding locking sleeve back, insert the end of the adjustable nozzle into the coupler.
▪ Release the locking sleeve on the quick connect coupler to lock the adjustable nozzle in.
▪ Pull on the nozzle to ensure it is locked into the quick connect nozzle coupler on the lance
before use .
9.3 Attaching a garden hose or the water inlet hose (Fig. 7)
▪ Push the locking sleeve of the garden hose/water inlet hose back and then insert the
connecting head into the water inlet coupling located on the bottom rear of the pressure
washer.
▪ Release the locking sleeve on the garden hose/water inlet hose to lock in.
▪ Pull on the garden hose/water inlet hose to ensure it is locked into the pressure washer
before use.
▪ Select water source when using the water inlet hose supplied with the pressure washer.
▪ To remove garden hose/water inlet hose from the pressure washer, pull locking sleeve on
hose back and pull hose connecting head out of the water inlet coupling.
10 OPERATION
10.1 Starting/stopping the pressure washer (Fig. 8)
▪ Grip the pressure washer by the handle in your preferred hand while balancing the front of
the tool with your other hand.
▪ Using your thumb, push the unlock button (2) up then press in the pressure washer trigger
switch (1). Release the trigger lock.
▪ To stop the pressure washer, release the trigger switch (1)
