Manual Varo POWC20100 (page 5 of 7) (English)

701788

Zoom out

Zoom in

1/7

POWC20100 EN

▪ Saw blades must be kept sharp and in good condition. Replace partially fractured and

broken saw blades immediately.

▪ Work calmly and evenly with the jig saw. You will thus avoid accidents and the saw blades

and the jig saw will last longer.

7 OPERATING INSTRUCTIONS

7.1 Changing the saw blade (Fig 1)

Releasing the saw blade.

Turn the screws anticlockwise (A)

Insert the saw blade in the ram up to the stop and tighten the two screws of the retention clip.

Important ! : Make sure the saw blade sits properly in the slot of the roller and ram.

7.2 Switching ON/OFF (Fig 2)

Switching ON : Press the On/Off switch.

Continuous operation. Lock the On/Off switch with the locking button.

Switching Off : Press the On/Off switch and release.

A: locking button

B: ON/Off switch

7.3 Adjusting the base (fig 3)

Loosen the 2 screws to set the base to an angle up to 45° on the right or left side and re-tighten

the screws.

7.4 Dust extraction

The jigsaw is equipped with a dust extractor socket. You can connect your vacuum cleaner to

the socket at the rear of the jigsaw. If you require a special adapter, please contact the

manufacturer of your vacuum cleaner.

8 TECHNICAL DATA

Nominal voltage

230-240 V - 50 Hz

Power consumption

350W

Cutting rate

3000 min

-1

Cutting depth in wood

45 mm

Cutting depth in steel

6 mm

Cutting depth in plastic

10 mm

Mitre cuts

Up to 45° (left and right)

Connection type

Universal

9 NOISE

Noise emission values measured according to relevant standard. (K=3)

Acoustic pressure level LpA

86 dB(A)

Acoustic power level LwA

97 dB(A)

ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).

aw (Vibration)

17.9m/s²

K = 1.5 m/s²

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Varo POWC20100 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varo POWC20100

Varo POWC20100 Additional guide - English - 2 pages

Varo POWC20100 User Manual - German - 8 pages

Varo POWC20100 User Manual - Dutch - 8 pages

Varo POWC20100 User Manual - French - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Varo POWC20100 Manual

Product: