581872
12
Zoom out
Zoom in
Previous page
1/16
Next page
POW63771 EN
Copyright © 2015 VARO P a g e | 12 www.varo.com
The engine air cleaner element must be serviced (cleaned) after 25 hours normal mowing.
The foam element must be serviced regularly if the mower is used in dry dusty conditions.
9.1.1 To clean air filter (Fig. 10)
Press down the two tabs on top of the filter cover. Remove cover.
Wash filter element in soap water. DO NOT USE GASOLINE!
Air dry filter element.
Place a few drops of SAE30 oil on the foam filter and squeeze tightly to remove any
excess oil.
Reinstall filter.
NOTE: Replace filter if frayed, torn, damaged or unable to be cleaned.
9.2 Cutting blade
CAUTION: Be sure to disconnect and ground the spark plug wire before
working on the cutting blade to prevent accidental engine starting. Protect
hands by using heavy gloves or a rag to grasp the cutting blades.
Tip mower. Remove the hex bolt and washer which hold the blade and blade adapter to the
engine crankshaft. Remove the blade and adapter from the crankshaft.
WARNING: Periodically inspect the blade adapter for cracks, especially if
you strike a foreign object. Replace when necessary.
For best results your blade should be sharp. The blade may be resharpened by removing it
and either grinding or filing the cutting edge keeping as close to the original bevel as possible.
It is extremely important that each cutting edge receives an equal amount of grinding to
prevent an unbalanced blade. Improper blade balance will result in excessive vibration
causing eventual damage to the engine and mower. Be sure to carefully balance blade after
sharpening. The blade can be tested for balance by balancing it on a round shaft screwdriver.
Remove metal from the heavy side until it balances evenly.
Before reassembling the blade and the blade adapter to the unit, lubricate the engine
crankshaft and the inner surface of the blade adapter with light oil. Install the blade adapter on
the crankshaft with the "star" away from the engine. Refer to figure 11. Place the blade with
the part number facing away from the adapter. Align the washer over the blade and insert the
hex bolt. Tighten the hex bolt to the torque listed below (9.3)
9.3 Blade mounting torque
Center Bolt 40Nm.min, 54Nm.max. To insure safe operation of your unit. ALL nuts and bolts
must be checked periodically for correct tightness.
After prolonged use, especially in sandy soil conditions, the blade will become worn and lose
some of the original shape. Cutting efficiently will be reduced and the blade should be
replaced. Replace with an approved factory replacement blade only. Possible damage
resulting from blade unbalance condition is not the responsibility of the manufacturer.
When you change the blade, you must use the original type marked on the blade (for order the
balde, pls. contact your local dealer or call our company, see cover page).
Warning: Do not touch rotating blade.
Net Weight
(with grass
collector)
25Kg 28Kg 28Kg 28.5Kg 31.5Kg 31.5Kg
22.5Kg
Height
adjstment :
Level
1
Level
2
Level
6
Level
9
25 mm
25 mm
25 mm
25 mm
25 mm
25 mm 25
mm
30.5mm
30.5mm
30.5mm
30.5mm
30.5mm
30.5mm
36.25
mm
36.1mm
36.1mm
36.1mm
36.1mm
36.1mm
36.1mm
47.5m
m
41.7mm
41.7mm
41.7mm
41.7mm
41.7mm
41.7mm
58.75
mm
47.2mm
47.2mm
47.2mm
47.2mm
47.2mm
47.2mm 70mm
52.8mm
52.8mm
52.8mm
52.8mm
52.8mm
52.8mm /
58.3mm
58.3mm
58.3mm
58.3mm
58.3mm
58.3mm /
63.9mm
63.9mm
63.9mm
63.9mm
63.9mm
63.9mm /
69.5mm
69.5mm
69.5mm
69.5mm
69.5mm
69.5mm /
75mm
75mm
75mm
75mm
75mm
75mm /
Level
3
Level
4
Level
5
Level
7
Level
8
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varo POW63771 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varo POW63771 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varo POW63771

Varo POW63771 User Manual - German - 17 pages

Varo POW63771 User Manual - Dutch - 17 pages

Varo POW63771 User Manual - French - 17 pages

Varo POW63771 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info