3
ENGLISH
USE
HOW TO CONNECT THE ACCES-
SORIES
Make sure that the appliance is
disconnected from the electrical
socket.
Attach the hose assembly connector
(C) to the vapor system as follows:
Hook the socket flap on to the lower
hook of the connector.
Pull the flap well open.
Insert the connector into the socket
until it clicks into place.
Press the button to unlock and extract
the connector.
CORD REWIND
Turn the steam generator as shown
in the diagram in order to rewind the
cord inside the coiler. Fasten the cord
terminal with the special lock.
HOSE HANDLE
This component is part of the hose
assembly and enables attachment of
various cleaning accessories. The
grip has a button for the distribution
of steam (S) and a trigger safety lock.
To block or release the steam use
the button positioned on the side of
the grip.
The lock and release position is in-
dicated in the icon positioned on this
grip. The push-button for delivering
steam is a low voltage (12V) switch.
The handle is provided with an easy
as 1-2-3 quick selector for the steam
level. Select the desired steam level,
then pull the trigger (S) to release
the steam. 1 = low - 2 = medium - 3
= high
EXTENSIONS
These are connected to the handle
so that the work field is expanded
allowing you to reach high areas,
and low areas without stooping. The
extensions have the same attachment.
HOW TO FASTEN THE PIECES
TOGETHER
All the pieces have a bayonet style
push ‘n’ lock security connector. To
connect the handle to the extensions
or to the accessories simply insert
and push as shown in the drawing
(A). To extract the accessory turn the
ring clockwise and pull (quick twist
‘n’ pull) (B).
