540880
3
Zoom out
Zoom in
Previous page
1/85
Next page
Vanguard
TM
Twin-Cylinder OHV Liquid-Cooled Engine
SAFETY INFORMATION
The Briggs & Stratton engine is made of the finest
material in a state-of-the-art manufacturing facility.
Please understand that Briggs & Stratton sells engines
to original equipment manufacturers. It also sells to
others in the distribution chain who may sell to the
ultimate consumer, an equipment manufacturer, another
distributor or a dealer. As a result, Briggs & Stratton does
not necessarily know the application on which the engine
will be placed. For that reason, carefully read and
understand the operating instructions of the equipment
before you repair or operate.
You should also understand that there are equipment
applications for which Briggs & Stratton does not
approve the use of its engines. Briggs & Stratton engines
are not to be used on vehicles with less than 4 wheels.
This includes motor bikes, aircraft products and all
terrain vehicles. Moreover, Briggs & Stratton does not
approve of its engines being used in competitive events.
FOR THAT REASON, BRIGGS & STRATTON
ENGINES ARE NOT AUTHORIZED FOR ANY OF
THESE APPLICATIONS. Failure to follow this warning
could result in death, serious injury (including paralysis)
or property damage.
IN THE INTEREST OF SAFETY
The safety alert symbol ( ) is used to identify safety
information about hazards that can result in personal
injury.
A signal word (
DANGER, WARNING, or CAUTION) is used
with the alert symbol to indicate the likelihood and the
potential severity of injury. In addition, a hazard symbol
may be used to represent the type of hazard.
DANGER indicates a hazard which, if not
avoided,
will result in death or serious injury.
WARNING indicates a hazard which, if not
avoided,
could result in death or serious injury.
CAUTION indicates a hazard which, if not
avoided, might result in minor or moderate injury.
CAUTION: When this signal word is used without the
alert symbol, it indicates a situation that could result in
damage to the engine.
• Prior to work, read and understand the section(s) of
this manual that pertain to the job. Follow all safety
warnings.
• Wear suitable eye protection.
• Prevent accedental starting by removing spark plug
wire from spark plug when servicing engine or
equipment. Disconnect negative battery terminal if
equipped with electric starting system.
• Periodically clean engine. Keep governor parts free
of dirt, grass and other debris which can affect
engine speed.
• Always use fresh gasoline. Stale fuel can gum
carburetor and cause leakage.
• Check fuel lines and fittings frequently for cracks or
leaks and replace if necessary.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard Twin Cylinder OHV Liquid-Cooled at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Twin Cylinder OHV Liquid-Cooled in the language / languages: English as an attachment in your email.

The manual is 7,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info