460104
52
Zoom out
Zoom in
Previous page
1/57
Next page
电源连接
把电源变压器(图1 - 参考 21)连接到器具上,
即插头插入器具的相应插座内(图1 - 参考5)。
将电源转换器连接到电源插座。
开机和关机
651.01型: 根据想要的旋转方向,按下两个按钮
(图1 - 参考3) 之一。 器具将以3500转/分的
转速启动。 随后每次按下该按钮,将会以
6000、8500和10000转/分提升旋转速度,随后即
及8500、6000和3500转/分降低速度。(图2)
欲关机,可按下另外的一个按钮(图1 -
参考3)。
651.02型: 器具的开机和关机是通过开关(图1 -
参考4)进行。 备有两种不同的转速选择:
4500和6000转/分。
电池充电(型号 651.02)
首次使用器具之前,以及随后每次电
量耗尽后,应充电12小时然后再使用。
通过开关(图1 - 参考4)关机。
仅可在设备关闭情况下,才能对电池充电。
把电源变压器(图1 - 参考21)连接到器具上,
即插头插入器具的相应插座内(图1 -
参考5)。
将电源转换器连接到电源插座。
只有在设备电量出现明显下降的情况下
才对电池进行充电。
如电池充满电,美甲器可连续使用60分钟
而无须连接电网。
美甲器既可以电网供电模式运作,也可
以无绳模式(无线)模式运作。
如电池的电量耗尽,接上电网后也无法
运作,则必须关闭器具,对电池充电约5分钟
并接通电网后重新开机。
附件的安装和拆卸
务必在设备关闭情况下执行该项操作。
通过拉动来把附件从器具上拆下。
安装时只需用力把附件推压到底即可(图3)。
651.01型: 打磨管是通过压力方式套在支
座上。 必要时可使用工具来帮助附件的拆
卸(图4)。
使用建议
- 建议使用干消毒的附件。
- 皮肤必须为干燥的。
在开操作前,不要洗和洗手。
剪短指
使用细粒金刚石磨盘(图1 - 位置7)。
经常加护理更加结实
剪刀,可更加精地处理指
预防指内。
使用打磨(图1 - 位置14)或火苗型打磨头(图1
- 位置16)来处理预防指肉里
轻轻地倾斜使用,手要保持稳定
老茧鸡眼
粒圆金刚石打磨头(图1 -
位置7)老茧鸡眼部位的硬皮
后,金刚石圆打磨头(图1 -
位置15)来完成处理
硬皮老茧
粗粒金刚石打磨头(图1 -
位置8)打磨待处理位置的面,反复操作
至老茧硬皮完全除。
于尤顽固位,长金刚石打磨头(
图1 - 位置9)进行处理
甲附近的死皮
甲附近的死皮其是脚指甲附近,可
使用火苗型打磨头(图1 - 位置16)进行处理
圆柱型打磨头(图1 -
位置17)来削薄较厚脚指位。
欲磨位和除不平整,可毡块
磨头(图1 - 位置12)进行。
半月痕长皮
操作应在皮肤湿时进行。
半月痕上的皮肤,可使用去皮(图1 -
位置20)进行(仅对651.01型)。
顶部部转动会前后动。
53
使用
运作的
)
00060557 norme uso INT:Layout 1 17/06/2008 8.28 Pagina 53
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Valera ManiSwiss 651.01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Valera ManiSwiss 651.01 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info