769443

Valco Baby Rebel Q Manual

2
Zoom out
Zoom in
Previous page
1/8
Next page
ASSEMBLY
OPENING YOUR STROLLER
FIGURE A
1. Remove the stroller from the carton and dispose
of all packaging responsibly. The front wheels, rear
wheels, seat, bumper bar and hood all need to be
installed prior to use
2. Lay the stroller frame at on the ground with the
handle facing upwards. Release the frame lock if
engaged (see Diagram Q)
3. Lift the handle upward to a vertical position. You
will feel the chassis unfolding as you lift.
FIGURE B
4. Continue to lift the handle until you feel the
chassis lock into the open position.
IMPORTANT WARNING: ALWAYS TEST THAT ALL
LATCHES ARE SECURELY ENGAGED BEFORE USE.
INSTALLING/REMOVING THE WHEELS
FIGURE C - REAR WHEELS
5. Pressing on the axle release button, insert the
axle through the outside of the metal hub and
through the nylon brake cog.
IMPORTANT: INSERT THROUGH OUTSIDE OF THE
WHEEL - THE SIDE WHICH DOES NOT HAVE THE
BRAKE COG SPROCKETS
6. While pressing the axle release button (6), insert
the wheel axle into the wheel housing of the frame
at the rear of the stroller chassis.
7. Keeping the axle release button depressed, insert
the wheel as far as it will go into the channel.
Release the button and pull the wheel slightly
back toward you to ensuring that it has locked
securely into place.
8. Repeat this procedure for the other wheel.
9. To remove a rear wheel, rmly grasp the wheel
spokes while pressing the axle release button.
Gently pull the wheel free of the wheel housing.
FIGURE D - FRONT WHEELS
10. Line each front wheel pin (10) with the
corresponding front wheel housing (11).
11. Insert wheel pin into the wheel housing and push
it up until it clicks into place.
12. To remove the front wheel, rmly grasp the wheel
while pressing the wheel release button (13) and
gently pull the wheel free of the wheel housing
PRESS
6
A
B
C
Outside
wheel hub
Axle button
5
click
10
11
13
D
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Valco Baby Rebel Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Valco Baby Rebel Q in the language / languages: English as an attachment in your email.

The manual is 1.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info