550277
78
Zoom out
Zoom in
Previous page
1/80
Next page
76
5. Taking care of Galileo
NOTE:
- After a dive, Galileo stores tissue
saturation data once an hour while
on the surface until it is completely
desaturated. If you change the
battery while Galileo has remaining
desaturation time, the tissue data
will not be lost, but Galileo will
reference the last stored data set. As
a consequence, the data displayed
on the surface screen after the
battery change (desaturation time,
surface interval, no-fl y time and
CNS O
2
) may be different from the
values displayed just prior to the
battery removal.
- After replacing the battery, you must
set the date and time.
5.2.2 Replacing the battery in the
Smart transmitter
!
WARNING
We recommend having the battery of the
transmitter replaced by an authorized
SCUBAPRO UWATEC dealer. The change must
be made with particular care in order to
prevent water from seeping in. The warranty
does not cover damages due to an improper
placement of the battery.
For best results, use the transmitter battery
set PN 06.201.920, comprising a CR2450
battery and a 26.00 x 2.00 mm transmitter
cap o-ring.
!
WARNING
- Never touch the metal surface of the battery
with bare fi ngers. The two battery poles
must never be short circuited.
- A leaking transmitter cap may lead to the
destruction of the transmitter by water
seeping in or cause the transmitter to
switch off without prior notice.
- Always open the transmitter in a dry and
clean environment.
- Only open the transmitter to replace the
battery.
1. Remove the transmitter from the HP
port of the fi rst stage regulator.
2. Dry the transmitter with a soft towel.
3. Remove the 3 screws with a Phillips
screwdriver.
4. Carefully remove the transmitter cap.
5. Carefully remove the transmitter cap
o-ring. Be careful not to damage the
sealing surfaces.
6. Remove the battery by holding it on
both sides. Do not touch the contacts
or the electronic parts.
!
WARNING
If you notice traces of seeping water, damages
or other defects on the o-ring, do not use the
transmitter for further dives. Take it to an
authorized SCUBAPRO UWATEC dealer to be
checked.
7. Always insert a new o-ring when you
replace the battery and dispose the
old o-ring. Make sure that the new,
lubricated o-ring is in perfect condition,
and that o-ring, o-ring groove and the
sealing surface of the transmitter and
transmitter cap are free of dust and
dirt. If necessary, clean the parts with
a soft cloth. Fit the o-ring in the o-ring
groove.
8. Wait for 30 seconds, then insert the
new battery. Ensure that the “+” side
is facing away from the transmitter. The
transmitter can be damaged if you do
not insert the battery correctly.
9. The transmitter will now perform an
automatic test and switch into ready
mode after 60 seconds.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UWATEC Galileo Sol at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Galileo Sol in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of UWATEC Galileo Sol

UWATEC Galileo Sol User Manual - German - 82 pages

UWATEC Galileo Sol User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info