Manual UWATEC Aladin Tec (page 46 of 48) (English)

550271

Zoom out

Zoom in

1/48

IX Appendix

IX UWATEC

Aladin

dive computers

Never touch the metal surface of the battery with bare fingers.

The two battery poles must never be short circuited.

Procedure:

To replace the battery you need a coin or

the SCUBAPRO universal tool

and a clean cloth.

• A leaking battery cap may lead to the destruction of Aladin

water see-

ping in or cause Aladin

to switch off without prior notice.

• Always open the battery compartment in a dry and clean environment.

• Only open the battery compartment to replace the battery.

1. Dry Aladin

with a soft towel.

2. Turn the battery cap with a coin or with the

SCUBAPRO universal tool.

3. Remove the battery cap.

4. Remove the o-ring carefully. Do not damage

the sealing surfaces.

5. Remove the battery. Do not touch the contacts.

Protect the environment and dispose the battery properly.

If you notice traces of seeping water, damages, or other defects on the o-ring,

do not use Aladin

for further dives. Take it to an authorized SCUBAPRO

UWATEC dealer for check and repair.

6. Always insert a new o-ring when you replace the battery and dispose the

old o-ring. Make sure that the new o-ring is in perfect condition, and that

o-ring, o-ring groove and the sealing surfaces are free of dust and dirt.

If necessary, clean the parts with a soft cloth. Fit the o-ring in the o-ring

groove of the battery cap.

7. Use only an original UWATEC o-ring PN 06.201.610. This o-ring is Teflon

coated and does not require additional lubrication.

8. Do not lubricate the o-ring as the lubricant will chemically attack the bat-

tery cap.

9. Check the proper polarity of the battery. Aladin

can be

damaged if you do not insert the battery correctly.

Insert the new battery, with "+" pointing outwards, into

the battery compartment.

After battery replacement Aladin

will perform an automatic test

(8 sec.) and gives a short beep when the test is done.

10.The battery cap can be installed with a ±120° offset. The

alignment circles are there to ensure proper positioning

of the cap. If the rotation is stopped before alignment,

watertightness may not be ensured. If the rotation is for-

ced beyond the alignment, the cap may break. Damage

to Aladin

due to improper placement of the battery cap

is not covered by warranty.

Push the battery cap firmly down and turn it clockwise until

the two circles

are aligned.

11.Check Aladin

by switching on ->18 .

WARNING

SCUBAPRO

universal tool

Alignment circles

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Aladin Tec in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

UWATEC Aladin Tec Manual

Product: