484767

US Blaster USB 7015 Manual

3
Zoom out
Zoom in
Previous page
1/49
Next page
D
E
S
I
GN B
Y U
.S B
L
ASTER - P.O. Box 5376 - Carefree - AZ 85377 - USA.
USB 7015
Console mixer
I
NPUT CHANNEL SECTION
1. BALANCE INPUT
Electronially Balanced inputs acceptable a standard XLR male connector.
+
48V Phantom Power available on each input Mic socket. And this switch is
on Rear Phantom Power.
2. LINE INPUT
The unbalanced Mic input is provided for the use of a unbalanced mic and
is designed to accept a unbalanced high impedance input signal. (This use
for connection Deck,Turntable,Keyboard etc,.)
3. GAIN CONTROL
Adjusts input sensitivity from -60dB to -20dB with the -20dB pad switch in
the out position, and -40dB to OdB when the -20dB pad switch is pushed.
4. HIGH
Control the high frequency tone of each channel. Always set this control to
the 12 O'clock position. You can control the high frequency tone according
to the speaker, the conditions of listening position and listener's taste,
Clockwise rotation of the control increases level.
5. MID
This has a function which controls the middle frequency tone of each chan-
nel. Always set this control to the 12 o'clock position. You can control the
middle frequency tone according to the speaker, the conditions of listening
position and listener's taste. Clockwise rotation of the control incrases the
level, and vice versa.
6. LOW
Controls the low frequency tone of each channel. Always set this control to
the 12 o'clock position. You can control the middle frequency tone accor-
ding to the speaker, the conditions of listening position and listerner's state.
Clockwise rotation of the control increases the level.
7. SEND
Use this contol to set the level of signal from external stereo souce and the
main signal control is recontrolled by the STEREO or MONO section.
8.EFF
Use this control when you want to get sound effects by adjustment of the
input signal. when you don't use external sound, digital delay will be wor-
king which is installed inside.
© US Blaster Europe BV
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for US Blaster USB 7015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of US Blaster USB 7015 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info