168950
3
Zoom out
Zoom in
Previous page
1/48
Next page
USB 1389 - 1390 - 1391 - 1392
Class-AB Power amplifiers
INTRODUCTION
Thank you for purchasing this US BLASTER Class AB full range amplifier for your car audio system.
Now you own an amplifier of uncompromising design and engineering incorporating the latest advan-
ced circuit technology.
You will soon discover the amplifiers’ optimum sound and reliable performance.
US BLASTER amplifiers are adopted by advanced craftsmanship using the highest quality components
and strict quality control system. In order to provide you with long and pleasureable listening, we
recommend that you have your amplifier installed by an authorized US BLASTER dealer. It will ensu-
re installing your product properly and will also increase the warranty to one year. (please see the
w
arranty section for more details.)
Please read this manual thoroughly to ensure you get the maximum benefit from this amplifier. When
installed properly, this unit will provide you years of trouble-free performance.
DESIGN FEATURES
SMD Hi-Fi audio components.
FR-4 heavy duty double side PCB.
Low ESR high capacitance filter capacitor.
Super noise rejection circuit.
Smart protection system against overload, short circuit, overheat and low voltage.
Gold plated heavyduty connectors.
Intergrated high performance filters.
AMPLIFIER FUNCTIONS
1. Speaker connection
• Nev
er connect the speak
er cables with the chassis ground. This could destory your amplifier
.
• Check that y
our speakers are connected correctly which means plus to plus and minus to minus.
We recommend speaker cable from 16 Gauge or up. Other connection ways are shown in the attach-
ment.
2. BATT+
Battery +(plus) terminal. The +(plus) 12 Volt power cable must be connected with a fuse on the bat-
tery +(plus) terminal. We recommenda fuse listed on pre-installation a 12 feet copper cable with 8
Gauge thickness or up
.
3. REM
R
emote terminal. The remote cable must be connected with the radio remote output
terminal so that the amplifier will switch on and off automatically with the r
adio. If there are two or
more amplifiers connected to this antenna terminal it might be necessary to add an additional relay.
Please consult y
our dealer
.
4. GND
Chassis ground terminal. The chassis ground cable must be connected v
ery tight on a nearb
y massi
-
v
e and electric conductiv
e place.
© US Blaster Europe BV
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for US Blaster usb 1389 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of US Blaster usb 1389 in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info