Manual Urmet 1067-022 (page 5 of 12) (English, German, Italian)

741490

Zoom out

Zoom in

1/12

DS1067-057B 5

ENGLISH

GENERAL DESCRIPTION

The 1067/022 indoor display keypad, used to control and program the 1067 system is equipped with :

 LCD backlit display with 2x 16 characters with contrast and luminosity regulation;

 9 LED to signal the system status ( Power supply, Failure, Maintenance, Timing programmer, Open

input, Excluded inputs, Alarm, Tamper, Zone status);

 12 door-protected alphanumerical keys;

 7 browser keys;

 buzzer with adjustable volume;

 1 programmable input;

 environment listening microphone (by phone with PSTN or GSM interface)

The keypad is protected against opening and removal and is powered by the Bus that connects it to the control

panel.

WARNING! In this document there are only present some essential indications about product.

For further and more detailed information, refer to manuals concerning 1067 control panels.

POSITIONING

Keypad must be positioned:

 in an environment that is sheltered and protected from water and humidity;

 on a dry and level wall;

 in the vicinity of the accesses to area to be protected;

 in an inner location which is not subjected to excessive sudden

rises/falls in temperature, and is protected by anti-burglar system; at

160 cm height for normal installations, or at 120 cm height for

installations suitable to disabled users

KEYPAD OPENING

Use a slotted screwdriver to open the keypad by gently pressing the point indicated in the image in order to

disengage the closure spur (Fig. 1).

INSTALLATION

 For running the cables, open the scored hole on the bottom of the keypad (D - Fig. 2). Otherwise, the

scored holes for the cable ducts can be used (E - Fig. 2).

 Secure the keypad bottom to the wall by means of 6 mm plugs (A/B - Fig. 2 - not provided). During fixing

always use also the hole (C - Fig. 2) for the protection against removal.

 If bottom is fastened over round or rectangular a 3-place built-in box (e.g. BTICINO 503), use holes (A or B)

and suitable screws.

Warning: before fixing, verify the bottom direction: cover closing hook shall be positioned at the bottom.

Warning: For EN50131 Degree 3 certification, always use the anchor bolt in position C, even if the

keypad is fixed to a flushmounting box. This requirement is not mandatory for Degree 2 or lower

installations. This requirement is not mandatory for Degree 2 or lower installations.

 For easier wiring, it is advisable to strip the cable as far as the access hole.

Fig. 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Urmet 1067-022 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Urmet 1067-022 Manual

Product: