Manual UPM WT440 (page 2 of 4) (English, French)

557948

Zoom out

Zoom in

1/4

Remote (Outdoor) Temperature

Local (Indoor) Temperature

Selecting C or F Temperature Display°°

TEMPERATURE DISPLAY

If the Learn Function is performed successfully (refer to the WIRELESS

TRANSMISSION section), the remote (outdoor) temperatures will display in

the bottom-right corner of the LCD screen.

Press to toggle between channels 1, 2, 3 and 4.CHN

The local (indoor) temperature is displayed in two locations.

GRAPHICAL - the local (indoor) temperature is shown as a bar graph on

the left of the LCD screen.

NUMERICAL - the local (indoor) temperature can be viewed at the

bottom-right of the LCD screen.

NOTE:

CHN

The remote (outdoor) temperatures are also shown here. You can

scroll through the local and remote channels 1 to 4 by pressing .

Toggle between C and F by pressing in the Clock mode.°° °C/°F

WIRELESS TRANSMISSION

For optimal performance:

Place the receiver and remote transmitter side by side about 1 metre

apart, and allow the receiver and remote transmitter to synchronize

for 10 minutes before you place the remote transmitter outdoors.

Environmental factors and signals from other household devices, such

as remote entry controls, security systems, and computers, may

interfere with the wireless transmission of this product and cause

temporary reception loss. This is normal and does not affect the general

performance of this product. Stable reception will resume once the

interference ends.

The remote transmitter should be placed in a dry shaded area.

NOTE: Fog and mist will not harm the remote transmitter but

direct rain must be avoided.

Mount the remote transmitter upright avoiding metallic objects

and frames, such as window sills. Verify that there are no obstacles

like a transmission tower or steep hill that can cause interference

and blockage between the remote transmitter and receiver.

Place the receiver unit at least 2 metres away from any electrical

devices, such as your television set, computer, cordless phone, or

any radio controlled equipment.

Replace unit(s) with fresh batteries when the Low Battery Indicator

lights up. Refer to the LOW BATTERY INDICATION section.

You may need to reposition the remote transmitter to a different

location and/or closer to the receiver for the best transmission.

SPECIFICATIONS

WS222 - WEATHER STATION RECEIVER

- Battery Type: 2 X 1.5V AA batteries

- Operating Temperature:

- Temperature Range:

-5°C to 50°C

-20°C to 55°C

1°C 0°C to 40°C

1°C

- Measurement Accuracy: Max. +/- within measuring range of

Resolution: 0.

WT440 - WEATHER STATION TRANSMITTER

- Battery Type: 2 X 1.5V AA batteries

- -20°C to 60°C

Temperature Range: -30°C to 70°C

0.1°C -10°C 1°C -10°C

1°C 0°C to 40°C

Operating Temperature:

- Temperature Resolution: for above / for below

- Measurement Accuracy: Max. +/- within measuring range of

- Transmission Frequency: 433.92 MHz

- Transmission Range: up to 40 metres in open area

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

FCC COMPLIANCE

TROUBLESHOOTING

CLOCK SETTING

DAY/NIGHT ICON

ALARM SETTING

Press and hold for 3 seconds to enter the Clock Setting mode.

You will hear a beep and the time will blink.

MODE

The day/night icon will change automatically depending on the time of day.

Scroll to the Alarm mode using . The symbol will appear.MODE AL

Press to set the hour.HOUR

DAY ICON:

The day icon is represented by a blinking sun, and a cloud.

- The day icon will be displayed between 6:00am to 5:59pm.

NIGHT ICON:

The night icon is represented by a half-cresent moon with stars and a cloud.

- The night icon will be displayed between 6:00pm to 5:59am.

Press to set the hour.HOUR

Press during clock setting to

change between 12 and 24 hour display.

ALARM/(°C/°F)

Press to toggle alarm on and off.ALARM

In the normal clock display, if the alarm is set ON, the symbol

will also appear on the display.

Press or no key press for one minute

will end clock setting.

MODE

When the alarm is set ON, the symbol will appear and the unit

will beep.

LIMITED TWO-YEAR WARRANTY

UPM warrants this product, excluding battery, to be free from defects in the materials or workmanship, under normal

use and service, for a period of two years from the date of purchase by the consumer.

If, at any time during the warranty period, the product is defective or malfunctions, UPM shall repair or replace it (at

UPM's discretion) within a reasonable period of time.

If the product is defective,

(i) return it, with a dated proof of purchase, to the retailer from which you purchased it, or

(ii) package it carefully, along with a dated proof of purchase and a short description of the malfunction, and mail it,

postage prepaid, to the following address:

UPM Marketing Inc.

Return Goods

Unit 10B - 250 Shields Court

Markham, Ontario

L3R 9W7

This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by UPM that

the defect or malfunction was caused by damage which occurred while the product was in the possession of the

consumer.

UPM's sole responsibility shall be to repair or replace the product within the terms stated above. UPM SHALL NOT BE

LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY

OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or

consequential damages, so this limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY UPM MAKES ON THIS PRODUCT. THE DURATION OF ANY

IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, IS HEREBY LIMITED TO THE TWO YEAR DURATION OF THIS WARRANTY. Some states do not allow

limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may have other rights which may vary from state to state.

If you have any questions concerning this warranty, please write to:

UPM Marketing Inc.

Customer Service Department

Unit 10B - 250 Shields Court

Markham, Ontario

L3R 9W7

Or call 1-888-GO-TO-UPM (1-888-468-6876), Monday to Friday, from 9:00am to 5:00pm eastern.

(2)

The remote (outdoor) readout on the receiver is

blinking.

The remote (outdoor) readout on the receiver is

blinking. The receiver will not detect or receive

the temperature data from the remote transmitter,

even after the Manual Learn Function has been

executed.

The temperature data on the remote transmitter

does not match the data displayed on the

receiver.

The temperature data on the remote transmitter

does not match the data displayed on the

receiver.

This may also be the result of a temporary loss of reception due

to interfering sources. Normal reception should resume once

the interference ends. Refer to the WIRELESS TRANSMISSION

section.

Re-synchronize the remote transmitter and receiver by pressing

and holding on the receiver for 3 seconds until a beep is

heard. The temperature data from the remote transmitter will

display on the receiver within 3 minutes. Refer to the WIRELESS

TRANSMISSION (Manual Learn Function) section.

CHN

Ensure the remote transmitter is away from any possible source of

interference and electrical disturbances. You may try to reposition

the remote transmitter in a different location and/or closer to the

receiver. The remote transmitter does have a maximum range of

40 metres, but any walls or windows the signal has to pass through

will reduce the distance. Due to the nature of the batteries,

extreme cold temperatures may also affect the transmission range.

Refer to the WIRELESS TRANSMISSION section and repeat the

Manual Learn Function with the remote transmitter in a new

location.

This may occur when you move the remote transmitter from one

environment to another. For example, when you bring the

transmitter from inside the warm house out to the cold exterior. In

such a case, there will be a big change in temperature. The

transmitter will record this change in temperature much quicker

than it is able to transmit the data to the receiver (which is done

once every minute). Therefore, you will temporarily get a

difference in reading between the remote transmitter and receiver.

The solution is to allow the remote transmitter some time to sit in

its new location to reach equilibrium. This may take several

minutes. Once the data is stable, the data displayed on the

remote transmitter should match that displayed on the receiver.

PROBLEM

SOLUTION

CUSTOMER SUPPORT HOTLINE: 1-888-468-6876

Press to set the minute.MIN

Alarm Setting

Clock Display

Local (Indoor) Temperature Remote (Outdoor) Temperature

Remote (Outdoor) Temperature

EXAMPLE:

Remote

Channel

Number

Remote

Channel

Number

PAGE 5 PAGE 6 PAGE 7 PAGE 8

PAGE 13 PAGE 14 PAGE 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of UPM WT440 in the language / languages: English, French as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

UPM WT440 Manual

Product: