557889
2
Zoom out
Zoom in
Previous page
1/3
Next page
SINGLE POLE INSTALLATION DIAGRAM
FIGURE 1
PROG
ON
MO TU WE TH FR SA SU
1
3
5
7
2 4 6 8
PROG
ON
MO TU WE TH FR SA SU
4
3
2
1
X
THREE-WAY INSTALLATION
1
2
Remove existing switch and identify the wires in the wall box.
Using the supplied wire nuts, securely fasten the wires on the timer
to the wires in the wall box according to diagram FIGURE 2.
3
Disconnect the power supply at the circuit breaker or fuse before
proceeding with the installation.
Connect one of the (hot) wire on the timer to the
wire in the wall box.
black hot
Connect the other (hot) wire on the timer to the
wire in the wall box coming from the LOAD switch.
black load
Connect the (three-way) wire on the timer to the
wire in the wall box coming from the LOAD switch.
red three-way
Mount timer into the wall box carefully.
Restore power supply at the circuit breaker or fuse.
4
8
THREE-WAY INSTALLATION
There are two switches in a three-way circuit. The switch directly
connected to the circuit breaker is the HOT switch. The second switch is
the LOAD switch. Ensure you know which switch you are replacing.
INSTALLING THE TIMER IN PLACE OF HOT SWITCH
For proper grounding, connect the (ground) wire on
the timer to the ground “screw” found inside the wall box.
green
ADDING A JUMPER WIRE TO THE LOAD SWITCH
*
Disconnect the power supply at the circuit breaker or fuse before
proceeding with the installation.
5
Take out the LOAD switch and identify the terminal.common
6
Connect the wire to the LOAD switch according to diagram
FIGURE 2.
jumper
Connect the wire from the terminal to the
terminal of the LOAD switch.
jumper common
hot
Mount LOAD switch back into the wall box carefully.
7
Load Switch
Power Source
3-Way
Timer
Select program 20 with
Flashing for short random
Flashing for long random
RANDOM FUNCTION
3
2
1
short/ randomlong
programmable random
4
1
2
Press RND
Set program 20 to desired random time
3
4
1
2
Press RND
3
Short random from
OR Long random from
CLOCK
CD
RND
L
RND
-
Solid for programmable random
RND
* Short random 1-2 hours, long random 2-3 hours
* Programmable random only works with program 20; 1-2 hours
3
2
1
Deactivate random function with RND or ON/OFF
COUNTDOWN TIMER
1
4
2
5
6
7
8
Press SET
Start ON or OFF select with
Press SET
Hour select with
Press SET
Minute select with
9
10
3
Press SET
Second select with
Press SET
The to-the-second countdown feature of this timer starts from the ON or OFF
position and counts down to zero when activated.
CD
PROG
ON
3
5
7 9
1
2
4
6
8
10
CD
PROG
ON
Stop countdown timer with CD or ON/OFF.(or )One-Touch Countdown Button
Select CD mode using
Press CD or the to start the countdown timer.One-Touch Countdown Button
PROGRAM SETTINGS
disable program/master disable
1
4
2
5
7
8
*
*
Press SET
Day select with
* Individual days / weekly selections
Press SET
Hour select with
Press SET
Minute select with
3
Press SET
Each program has an “ON” and “OFF” setting. Both must be set for operation.
Example: PROG 1 has an “ON” and “OFF”
Program select with
1
2
Press SET
Press ON/OFF to disable ( )X
3
For select PROGRAM with
or go to using
single disable
F master disable
Press SET 3 times to exit (single disable)
OR press SET 4 times to exit (master)
CLOCK
Programs are arranged in a circular pattern
with the clock and countdown functions:
CLOCK
Program 1–20
CD
4
Repeat steps to to undo disable )(X
1
4
For a single program disable, both the “ON” and “OFF” setting must be disabled
individually
6
ETW193
Black
Black
Green
LOAD
Power Source
Black
Screw
Red
PAGE 4 PAGE 5 PAGE 6
PAGE 13 PAGE 14 PAGE 15
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UPM ETW193 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UPM ETW193 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info