694449
9
Zoom out
Zoom in
Previous page
1/10
Next page
9
Management & Maintenance
Cleaning of the furnace
In the ULMA FURNACE the maintenance has been
minimized i.a. by a well planned construction and the
large ash box holds approx. 30 liters. Ash emptying is
made as required. Cleaning of the tubes of the furnace
should be done at the same time the ashbox is
emptying. ( Appr. 1000 kg pellet) More frequent
intervals give increased efficiency. The giver should be
cleaned at least once per month.
Be extra attentive of to the quality of the pellets at new delivery or change of deliverer.
At new delivery a flue gas analysis should be made. Therefore we recommend a service agreement.
Contact your local installer regarding information of agreement.
The impeller should be cleaned at least 1-2 times per year with airpressure.
The tubes of the furnace should be cleaned 4-5 times per year (may vary some depending on
consumption and pellet quality) or when the flue gas temperature has risen with approx. 50 degrees
since previous cleaning.
• Turn off the burner a couple of hours before service.
• Lift up the lid on the top and clean the tubes. (Use the enclosed tube wisp.)
• Pull out the burner and clean from ash residues between the burner pipes at least two times per
year..
NOTE!
Always be careful with ash since it might be ignited. The ash should be kept in fireproof vessels.
Data about pellet firing
At installation the unit shall always be adjusted with a flue gas instrument and not only with help of
the human eye. When the installation is in place and has been gotten into shape with a flue gas
instrument, ask for a print of the check measurement from the installer. There you should be able to
read the values like CO, O2, CO2, combustion efficiency, draft, flue gas temperature etc.
Goal values:
CO2 : 11 %
CO :10 - 300 ppm
O2 : 8 – 10 %
HPa : -0,10 / -0,15 (draft)
Combustion efficiency (average): 90-92 %
Gene
ral facts about fuel pellets
A fuel pellet is per definition a”short cylindrical item” for combustion. Fuel pellets are made by
pressing of finely powdered dry fuel that is made by waste products from the forest industry. The
diameter of the fuel pellets existing on the Swedish market today, vary between 6-8 mm. The effect
on the outer environment is minimal at combustion of pellets. At the combustion in a pellet system of
for example a pellet boiler or stove the stored sun energy in the raw material is released. The
emissions of unburned hydrocarbons as well as dust are in almost all cases far below the marginal
values of the authorities. The carbon dioxide taken up and captured during the growth of the trees is
released in the process to once again be taken up by the nature. In other words a circuitry.
Combustion of pellets does not provide the atmosphere extra carbon dioxide which happens at
combustion of the fossil fuels oil, gas and coal.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ulma 20 Kw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ulma 20 Kw in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ulma 20 Kw

Ulma 20 Kw User Manual - Dutch - 10 pages

Ulma 20 Kw User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info