784054
2
Zoom out
Zoom in
Previous page
1/29
Next page
Introduction
Thank you for purchasing the Ubiquiti Networks® G3 Flex
camera. This Quick Start Guide is designed to guide you
through installation and includes warranty terms.
Package Contents
G3 Flex Camera Flush Mount Pole/Wall
Mount
Outdoor
Cover
Security Screw
(Qty. 1)
Screws
(Qty. 3)
Screw Anchors
(Qty. 3)
Zip Ties
(Qty. 2)
Installation Requirements
Phillips screwdriver
Drill and 6 mm (1/4") bit for drywall anchors and 3 mm (1/8")
for screws)
Category 5e (or above) Ethernet cable
Note:
When using the Outdoor Cover, use an Ethernetcable
without a strain-relief boot on the connector. This willprevent
unnecessary tension on the cable ends during installation.
Cable without a strain-relief boot Cable with a strain-relief boot
TERMS OF USE: All Ethernet cabling runs must use CAT5e (or above). Shielded Ethernet
cable and earth grounding must be used for outdoor installations as conditions of product
warranty. TOUGHCableis designed for outdoor installations. It is the professional installer’s
responsibility to follow local country regulations.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ubiquiti UniFi Protect G3 flex- UVC-G3-FLEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ubiquiti UniFi Protect G3 flex- UVC-G3-FLEX in the language / languages: English as an attachment in your email.

The manual is 9.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info