301247
34
Zoom out
Zoom in
Previous page
1/37
Next page
U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
-
-
3
3
4
4
-
-
Check that the base unit’s mains power adapter is plugged in and power is
switched on. The base unit needs mains power for normal operation of the
phone-not just charging the batteries.
Make sure you are using the telephone line cable that was supplied with your
model 101. Other telephone line cables might not work.
Check that you have set the ringer volume to off. See the user manual for more
information.
Check that the total REN value of all equipment connected to your telephone line
is no more than 3. Disconnect one or more telephones and see whether that
helps.
The base does not ring.
Check that the base power is ON, and the base ringer is set ON.
Check that the line cord is correctly fitted and undamaged.
The CHARGE light on the base unit does not come on."
Check the handset is properly stationed.
Check the connections between the base unit and mains power socket.
Clean the batteries charging contacts with a dry cloth.
When I press the CALL button, I hear a loud noise.
The strange noise is caused by interference. Disconnect the mains power lead
from the back of the base unit, and then wait for 30 seconds before reconnecting
it.
There is 'beep' sound while I am on a call.
You may be going out of range of the base unit. Move closer, or your call may be
cut off.
Check the Batteries Level symbol on the display. If it is low, recharge the
batteries.
The Caller Display feature isn’t working.
You need to subscribe to the Caller Display feature from your service provider.
The caller may have withheld their number, or they may be calling from a
network that does not transmit the Caller ID (for example, it may be an
international call).
The handset’s batteries are running low within an hour or two.
Before you used the handset for the first time, you should have left it on the base
unit for up to 15 hours to charge the batteries fully.
You may need to replace the batteries.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ubiquio 101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ubiquio 101 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info