759806
3
Zoom out
Zoom in
Previous page
1/17
Next page
USE OF THE CROWN
To adjust the time or set the date, unscrew the crown
anti-clockwise. Pull the crown out to the 1st or 2nd
position. After adjusting, screw the crown clockwise back
on the case.
ADJUSTING THE TIME
Pull the crown out to the 2nd position so that the second
hand stops at the (0) position. Turn the crown to set the hour
and minute hands.
ADJUSTING THE DATE
Pull the crown out to the 1st position. Turn the crown anti-
clockwise to set the date. After the date has been set, push
the crown back to its normal position. Once you have set the
date or time or adjusted the chronograph second hand, push
the crown back to its normal position and screw the crown
clockwise back to the case.
USING THE CHRONOGRAPH
The chronograph is able to measure and display the time accurately
to 1/20th of a second, up to a maximum of 59 minutes and 59
seconds. The retrograde chronograph 1/20 second hand keeps
running continuously for 30 seconds after starting and then stops
at the (0) position. Press button B to change the watch to the
chronograph mode. The second hand stops at the (0) position and
changes to the chronograph 1/20 second hand. The chronograph
can be started and stopped at any time by pressing button A.
Pressing button B resets the chronograph. All hands will then return
to their (0) position. The chronograph second hand can be restarted
by pressing button B once again.
Hour hand
Chronograph minute
hand
Chronograph second
hand
Second hand
Date
(0) position
Button A
Minute hand
24-hour hand
Crown / normal
crown position
Button B
If the chronograph second hand and the chronograph 1/20 second
hand do not return to the (0) position after the chronograph has
been reset or after the battery has been replaced, you should do the
following. Pull the crown out to the 2nd position. Press button A to
set the chronograph second hand to the (0) position. Press button
B to set the chronograph 1/20 second hand to the (0) position. The
chronograph second hands can be advanced rapidly by continuously
pressing button A or B. Once the hands have returned to the (0)
position, return the crown to its normal position and screw the crown
cap clockwise back to the case.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TW Steel CEO Tech NL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TW Steel CEO Tech NL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info