541110
2
Zoom out
Zoom in
Previous page
1/2
Next page
Using the Amigo II
with Windows & Vista
®
After the Amigo II has been detected, you can
check if it has been set up as a USB audio device by
clicking Start > Control Panel > Sounds and Audio
Devices.
Then click on the Audio tab and click on the drop
down menu in the Sound Playback section to see if
Turtle Beach USB Audio is listed.
To use the Amigo II as your default audio device,
select it from the list and then click “OK”.
[Windows specific instructions are in italics]
After the Amigo II has been detected, you can check
if it has been set up as a USB audio device by
clicking Start (circular Windows logo) > Control
Panel > [Win : Hardware and Sound] > Sound.
In the Playback tab, the Amigo II should appear in
the list as Speakers: Turtle Beach USB Audio.
To use the Amigo II as your default audio device,
right-click on Turtle Beach USB Audio and select
“Set as Default Device”. A green circle with a check
mark will appear to indicate that this is now your
default sound device.
Using the Amigo II
with Windows
®
XP
After the Amigo II has been detected, you can check
if it has been set up as a USB audio device by
clicking on the Apple menu icon and go to System
Preferences > Sound.
Select the Output tab and you should see Turtle
Beach USB Audio listed.
Using the Amigo II
on a Mac
®
The Amigo II can be used to turn a standard headset
into a USB headset.
Insert the headset’s mic jack (sometimes colored
pink) into the pink Mic Input and the line jack
(sometimes colored green) into the green
Headphone Output.
Using the Amigo II
with a Headset
Setup Instructions
To use the Audio Advantage Amigo II with a
Windows
®
PC/laptop or Mac
®
, simply plug it into a
USB socket and the LED on the unit should light up,
indicating that it’s powered. The Windows or Mac
operating system will automatically detect the
device and inform you when it’s ready to use.
The .mm stereo analog output jack can be used to
connect headphones and powered speakers. Once
the Amigo II is set up as described below, you can use
headphones or speakers by plugging them into the jack.
You can connect an external microphone to the Mic
Input jack. For instance, if you’re using a headset that
has a microphone, you can connect the microphone
from the headset to Amigo II’s mic input.
If your PC or laptop has more than one USB socket, you
should always try to use the same socket for plugging
in the Amigo II. This will assure that it will always be
recognized as the same device by the operating system.
PLEASE NOTE: Some USB hubs may have problems
providing a consistent data stream for digital audio and
may cause data stream packet loss. This could result in
clicks or distortions on the USB audio from the Amigo II.
If you experience this problem when the Amigo II is
connected to your USB hub, do not use the hub and
instead connect the Amigo II directly to the USB
port on your Mac or PC/laptop.
Headphone
input
(green)
Microphone
input
(pink)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Turtle Beach Amigo II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Turtle Beach Amigo II in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info