548104

Tunturi Cable Cross Unit Manual

2
Zoom out
Zoom in
Previous page
1/16
Next page
Platinum by Tunturi 2 Cable Cross Stand Alone Unit Owner's
__________ Page
Instructions 2
Parts Listing 3
Hardware Comparison 4-7
Pre-Assembly Instructions 8
Congratulations on the purchase of your new Cable Cross Stand Alone Unit. This gym will provide you with a lifetime of en-
joyment to meet your strength training needs. Platinum by Tunturi strives to build the best quality multi-station gyms and to package
these gyms in such a way to avoid any damage during shipping.
In order to get started with your assembly you should first familiarize yourself with this manual. It is recommended that you
read through each step thoroughly before you begin. Begin by opening your boxes and separating all of your parts. Verify that all
parts are accounted for and have no damage. When all parts are accounted for, you may begin your assembly. Some items may
have been pre-assembled for your convenience. Please note that hardware quantities shown reflect total quantities for your gym and
may not reflect actual quantities in each bag. Assemble your gym on a solid level surface. This will ensure the best possible perform-
ance, function, and safety for the gym and your workout.
Assemble your gym according to the step by step instructions found in this manual. Failure to do so will void your warranty
and may result in personal injury. After assembly, you should check each station to ensure correct operation. If a problem arises,
recheck your assembly with these instructions to verify correct assembly. If you are unable to correct a problem or have questions
with your assembly please contact your authorized Tunturi dealer.
Platinum by Tunturi has built this gym to give you a safe, effective and enjoyable workout. However, there
is a risk assumed by individuals who use this type of equipment. It is very important that all warnings and
instructions are read and followed before beginning any exercise program.
It is also very important to read and follow the preventative maintenance schedule described in this
manual. If any of the warning labels or stickers are worn, faded, torn, scratched or missing they should be replaced
immediately.
WARNING
: There is a risk assumed by individuals who use this type of equipment. To minimize risk
always follow these rules.
1) It is essential that you consult with your physician before beginning any exercise program.
2) Inspect equipment before each use for loose, worn, or frayed parts (including cables, nuts and bolts). Replace
parts at first signs of wear (use only genuine Tunturi replacement parts). Use of equipment that is damaged,
worn, frayed or not completely assembled on a solid, level surface may result in injury.
3) Make sure all adjustment pins are fully engaged before using equipment.
4) Keep all parts of the body and clothing outside the path of any moving parts of the gym. Be alert to the
possibility of injury. Do not be careless.
5) Minors and children should not be allowed to play on or around this gym.
6) If you have any questions on proper use or maintenance of this gym, do not hesitate to call your local
PLATINUM BY TUNTURI distributor or TUNTURI www.tunturi.com
__________ Page
Main Assembly 9-13
Maintenance 14
Floor plan Layout 15
Contact 16
Table of Contents
Instructions
Warning
www.tunturi.com 3 Cable Cross Stand Alone Unit Owner’s
Frame Components
ITEM NO. DESCRIPTION QTY
1 Side Frame 2
2 Short Base Frame 1
3 Upright Support Frame 2
4 Wall Mount Tube 2
5 Selector Tube 2
6 Right Side Height Adjustment 1
7 Left Side Height Adjustment 1
8 Swivel Pulley Holder 2
9 Upper Support Brace 1
10 Pulley Holder/ Support Plate 4
11 Extended Upper Support Brace 1
12 Front Angle Bracket 1
13 Rear Angle Bracket 1
Tools Required
Hardware
ITEM NO. DESCRIPTION QTY
14 HCS 3/8”-16 x 5 1/4” 8
15 HCS 3/8”-16 x 2 3/4” 4
16 HCS 3/8”-16 x 2 1/2” 10
17 3 1/2” Pulley 4
18 Threaded Collar 2
19 HCS 3/8”-16 x 1 1/4 4
20 FHSCS 3/8”-16 x 3” 2
21 FHSCS 3/8”-16 x 5 1/4” 2
22 3/8” Flat Washer 64
23 3/8” Nylock 34
24 HCS 3/8”-16 x 2 1/4” 4
25 Plate 2
• 9/16” Wrench
• 9/16” Ratchet
• 3/4” Wrench
• Allen Wrench Set
• Tape Measure
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tunturi Cable Cross Unit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi Cable Cross Unit in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info