420633
1
Zoom out
Zoom in
Previous page
1/8
Next page
450P SOUNDFORCE
UK
Introduction
This instruction manual is for users of the TRUST 450P SOUNDFORCE. The speaker set can be used
when playing games or when listening to music on your PC.
Safety
1. Disconnect the power plug from the mains supply before cleaning the speaker set. Do not use a
liquid cleaner or a spray. Clean the speaker set with a damp cloth.
2. Do not use the speaker set near water.
3. Make sure nothing is placed on the power cable. Do not place the speaker set where the cable can
become worn.
4. Do not place any kind of object into the opening on the rear of the casing.
5. Do not repair the speaker set yourself. The speaker set may only be repaired by qualified personnel.
Connection
Function Description
Lamp (LED) Is lit when the speaker set is connected to a plug socket and is turned on.
Power Turns the speaker set ON and OFF.
Volume control Increases or decreases the volume.
Audio cable Connection to the sound card.
AC power cord Connection for the adapter.
Speaker cable Cable between the left and right speakers.
Headphone Connection for the headphones.
3D Gives a special effect to the sound produced.
TRUST CUSTOMER CARE CENTERS
24 HOURS: internet www.trust.com
Office Open Phone
1. Connect the AC Power cable to the power supply.
2. Connect the speaker cable to the “LINE-OUT” connection or the “SPEAK” connection on the sound
card. The connection is green on most sound cards.
Use
1. Turn the speakers on. The light will be lit.
2. Have your computer produce a sound.
3. Adjust the sound to your own wishes using the volume button.
Troubleshooting
Problem Cause Possible solution
The audio cable has not
been connected
correctly to the sound
card.
Check the connection on the sound card. If
necessary, see the instruction manual provided with
your sound card.
The plug has not been
inserted correctly.
Check whether the plug has been inserted
(correctly) into the plug socket.
The volume is too low. Increase the volume.
No sound can
be heard from
the speakers.
The Windows volume
control is too low.
Increase the Windows volume. See the Windows
instruction for instructions on how to do this.
Problem is
not listed
here.
The latest FAQ update
is available on the
Internet.
GO to http://www.trust.com/13028 for FAQ and
other product information.
If you still have problems after trying these solutions, please contact one of the Trust Customer Care
Centres (see table in bottom right-hand corner). Please have the following information available: the
article number (in this case 13028, or 13029 for the UK version) and a good description of what is not
working and precisely when the problem occurs.
DE
Einleitung
Diese Anleitung wendet sich an Benutzer des Lautsprechersets 450P SOUNDFORCE. Dieses
Lautsprecherset kann bei Spielen oder beim Abspielen von Musik verwendet werden.
Sicherheitshinweise
1. Ziehen Sie die Stecker aus der Steckdose, ehe Sie die Lautsprecher reinigen. Verwenden Sie keine
flüssigen Reinigungsmittel oder Sprays. Reinigen Sie die Lautsprecher mit einem feuchten Tuch.
2. Benutzen Sie die Lautsprecher nicht in der Nähe von Wasser.
3. Achten Sie darauf, das nichts auf dem Stromkabel steht. Stellen Sie die Lautsprecher nicht an eine
Stelle, wo das Kabel verschleißen kann.
4. Stecken Sie niemals Gegenstände - gleich welcher Art - in die Gehäuseöffnung auf der Rückseite.
5. Reparieren Sie die Lautsprecher nicht selbst. Wartungsarbeiten an diesem Set dürfen ausschließlich
von qualifizierten Servicetechnikern ausgeführt werden.
Anschließen
Funktion Beschreibung
Leuchtanzeige
(LED)
Leuchtet, wenn das Lautsprecherset an die Steckdose angeschlossen und
eingeschaltet ist.
Ein-/Ausschalter
(Power)
Zum Ein- und Ausschalten des Lautsprechersets.
Lautstärke
(Volume)
Lautstärke lauter oder leiser einstellen.
Audiokabel (Audio
cable)
Kabel zum Anschließen der Soundkarte.
Stromkabel (AC
power cord)
Zum Anschließen des Netzadapters.
Lautsprecherkabel
(Speaker cable)
Kabel zwischen dem rechten und dem linken Lautsprecher.
Kopfhörer
(Headphone)
Kopfhöreranschluss.
3D Für einen räumlichen Klangeffekt.
1. Schließen Sie das Stromkabel an das Stromnetz an.
2. Schließen Sie das Lautsprecherkabel an den LINE-OUT-Anschluss oder den SPEAK-Ausgang
(Lautsprecherausgang) der Soundkarte an. Bei vielen Soundkarten ist dieser Anschluss grün.
Verwendung
1. Schalten Sie die Lautsprecher ein. Die LED fängt an zu brennen.
2. Lassen Sie den Computer Klang erzeugen.
3. Stellen Sie den Klang mit dem Lautstärkeregler (Volume) nach Wunsch ein:
Fehlerbehebung
Problem Mögliche Ursache Mögliche Lösung
Das Audiokabel ist nicht
richtig an die
Soundkarte
angeschlossen.
Kontrollieren Sie den Anschluss an die Soundkarte.
Lesen Sie wenn erforderlich die Anleitung der
Soundkarte.
Der Stecker ist nicht
richtig angeschlossen.
Kontrollieren Sie, ob der Stecker (richtig) in der
Steckdose steckt.
Der Ton ist leise
eingestellt.
Stellen Sie den Ton lauter ein.
Kein Ton
durch die
Lautsprecher.
Der Ton ist in Windows
niedrig oder leise
eingestellt.
Stellen Sie den Ton in Windows lauter ein. Im
Benutzerhandbuch zu Windows können Sie
nachlesen, wie man das macht.
Das Problem
wird hier nicht
genannt.
Die neueste Version der
FAQ steht im Internet
zur Verfügung.
Gehen Sie zu http://www.trust.com/13028, wo Sie
die FAQ und andere Produktinformationen
nachlesen können.
Wenn das Problem mit Hilfe der vorgeschlagenen Lösungen nicht behoben werden kann, wenden Sie
sich an eine der Trust-Kundenbetreuungsstellen (siehe Tabelle rechts unten). Die folgenden Angaben
sollten Sie in jedem Fall zur Hand haben: die Artikelnummer (in diesem Fall 13028, für die UK-Version
13029) und eine genaue Beschreibung, die wiedergibt, was wann nicht funktioniert.
UK Mon - fri 8:00 - 16:00 +44-(0)845-6090036
Italia Lun – ven 9:00–13:00 / 14:00-18:00 +39-051-6635947
France Lun – ven 9:00 à 17:00 +33-(0)825-083080
Deutschland Mo – Fr 9:00 - 17:00 0800-00TRUST (0800-0087878)
España Lun – viernes 9:00 - 17:00 +34-(0)902-160937
Polska Pon do pią 9:00 - 17:00 +48-(0)22-8739812
Nederland Ma – vr 9:00 - 17:00 0800-BELTRUST (0800-23587878)
Other countries Mon – fri 9:00 - 17:00 +31-(0)78-6549999
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trust 3d soundforce 450p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trust 3d soundforce 450p in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info