756420
11
Zoom out
Zoom in
Previous page
1/17
Next page
EN 11
submerged waste water pump TWP 4025 E / TWP 7025 E / TWP 11025 E
ðThe device will be switched off as soon as the float
switch reaches the set or the minimum switch-off
height.
Info
Once the device has been switched off, any water still
remaining in the line can flow back through the device.
Manual operation
You can also use the device in manual operation.
In manual operation it is possible to siphon off the media to a
residual height of 35mm.
Please note that for manual operation of the TWP4025E the
starting water level must amount to at least 90mm, but must
not exceed the maximum of 210mm.
Please note that for manual operation of the TWP7025E/
TWP11025E the starting water level must amount to at least
115mm, but must not exceed the maximum of 250mm.
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Note
Running dry can cause damage to the device.
Switch the device off before it can run dry.
1. Hold onto the mains plug while pulling the power cable out
of the mains socket.
2. If necessary, pull the device out by means of the nylon
cord.
3. Lock the float switch(4) in the following position:
4
ðWith the float switch affixed in this position, the device
is switched on permanently.
4. Lower the device into the water at a slight angle to allow
any remaining air to escape. Make sure that the position of
the float switch(4) does not change.
5. Plug the mains plug into a sufficiently fused mains socket.
ðThe device switches on.
6. Oversee the pumping process.
7. When the device starts to suck in air, disconnect the power
cable from the mains socket by holding onto the mains
plug.
Info
If the device switches off again after only a brief period
of operation, the float switch might have come loose.
Fix the float switch again as depicted.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
1. Hold onto the mains plug while pulling the power cable out
of the mains socket.
2. Pull the device out by means of the nylon cord.
3. Disconnect the connection line.
4. Clean the device according to the Maintenance chapter.
5. Store the device according to the Storage chapter.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TWP7025E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TWP7025E in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TWP7025E

Trotec TWP7025E User Manual - German - 17 pages

Trotec TWP7025E User Manual - Dutch - 17 pages

Trotec TWP7025E User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info