756420
7
Zoom out
Zoom in
Previous page
1/17
Next page
EN 7
submerged waste water pump TWP 4025 E / TWP 7025 E / TWP 11025 E
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Before transporting the device, observe the following:
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Do not use the power cable to drag the device.
Only carry the device by the transport handle.
Do not carry the device by holding it at the power cable or
hose.
Storage
When the device is not being used, observe the following
storage conditions:
Dry and protected from frost and heat
In an upright position where it is protected from dust and
direct sunlight
With a cover to protect it from invasive dust, if necessary
Place no further devices or objects on top of the device to
prevent it from being damaged.
If you do not use the device for an extended period of time, it
must be cleaned thoroughly after its last application and before
recommissioning. Deposits and residues could lead to start-up
difficulties.
For restart, please proceed according to the Start-up chapter.
Assembly and installation
Scope of delivery
1x Submerged waste water pump
1x Reducer for inner diameters 25mm and 32mm as well
as for 1''internal threads
1x Elbow
1x Nylon cord (12m)
1x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Start-up
Connecting the pipe or hose line
The device may be operated using either a hose line or a pipe.
Ex factory, the device is delivered with a 1½" internal thread.
Please observe the following information regarding water
discharge:
Please note that making use of the reducer(7) might
decrease the device performance. The reducer(7) should
be shortened to the used diameter so as not to decrease
the device performance unnecessarily.
Please note that the device cannot be moved as flexibly
when using a solid pipe.
Please note that the maximum particle size is to be
reduced in proportion to the hose or pipe diameter.
Please note that the conveying capacity declines with an
increasing length of the water discharge line.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TWP7025E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TWP7025E in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TWP7025E

Trotec TWP7025E User Manual - German - 17 pages

Trotec TWP7025E User Manual - Dutch - 17 pages

Trotec TWP7025E User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info