753922
8
Zoom out
Zoom in
Previous page
1/10
Next page
8 EN
cordless work light PWLS 10 / PWLS 10-20V
Info
The tube light can be rotated clockwise by 90° and
counter-clockwise by 180°.
2. Press the on/off switch(5) to switch on the inspection
lamp(1).
3. Press the on/off switch(5) again to switch on the tube
light(6).
4. Press the on/off switch(5) again to switch the device off.
1
6
5
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch the device off.
Allow the device to cool down.
Hold onto the mains plug while pulling the power cable of
the charger out of the mains socket.
Remove the battery from the device (see Start-up chapter).
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Troubleshooting tasks which require the housing to be opened
must only be carried out by an authorized specialist electrical
company or by Trotec.
The battery does not charge:
Check whether the battery is correctly connected to the
quick charger. Slide the battery into the quick charger in a
way that the battery terminals engage in the quick charger.
The battery must lock in place in the quick charger.
Check the power connection.
Check the power cable and mains plug for damage.
Check the on-site fusing.
Check the quick charger for damages. Should the quick
charger be damaged, stop using it. Contact the Trotec
customer service.
Check the battery terminals for dirt. Remove any dirt.
The battery might be defective and have to be replaced.
Only use batteries of the same type.
The device is not lit:
The battery power might be too low. Recharge the battery.
Check whether the battery is correctly connected to the
device.
Slide the battery onto the device in a way that the battery
terminals engage. The battery must lock in place in the
device.
Check the battery terminals for dirt. Remove any dirt.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorised specialist electrical company or to
Trotec for repair.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PWLS10-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PWLS10-20V in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PWLS10-20V

Trotec PWLS10-20V User Manual - German - 12 pages

Trotec PWLS10-20V User Manual - Dutch - 11 pages

Trotec PWLS10-20V User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info