753927
7
Zoom out
Zoom in
Previous page
1/9
Next page
EN 7
LED construction site spotlight PWLS 10-30 / PWLS 10-70
Adjusting the lighting position
Please proceed as follows to adjust the lighting position:
1. If necessary, switch the device off by pressing the
on/offswitch(4).
2. Allow the device to cool down and remove the mains plug
from the mains socket.
3. Loosen the locking screws(3) on both sides of the device
by turning in counter-clockwise direction.
4. Rotate the surface LED(2) to the desired position.
2
3
7
Info
The transport handle of the LED construction site
spotlight can be rotated by up to 75° and the surface
LED by up to 360°.
5. Lock the new position of the surface LED by turning the
locking screws(3) on both sides of the device in clockwise
direction.
Operation
Tips and notes on handling the LED construction site
spotlight
General information:
Avoid looking directly into the light source.
Use the devices only for a temporary illumination of indoor
and outdoor areas, e.g. for construction sites.
The LED construction site spotlights are particularly suited
for illuminating larger areas.
Warning of hot surface
Some parts of this product can become very hot and
cause burns. Particular attention has to be given where
children and vulnerable people are present!
Warning
Do not look directly into the LEDs! The optical radiation
can be harmful for your eyes.
Warning of electrical voltage
Do not touch the device's power cable or power cable
connection with wet or damp hands.
Note
Make sure that the power cable is guided along the
back of the device. Never guide the power cable along
the front of the device!
Note
Do not connect the device at ambient temperatures
below -25°C or above 55°C, otherwise it will be
damaged!
Switching the device on
Please proceed as follows to switch the device on:
1. Check whether the power cable is plugged in correctly.
2. Press the on/off switch(4).
ðThe device switches on and the surface LED(2) lights
up.
Shutdown
Switch the device off by pressing the on/offswitch(4).
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Allow the device to cool down.
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PWLS 10-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PWLS 10-70 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PWLS 10-70

Trotec PWLS 10-70 User Manual - German - 9 pages

Trotec PWLS 10-70 User Manual - Dutch - 9 pages

Trotec PWLS 10-70 User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info