753291
12
Zoom out
Zoom in
Previous page
1/16
Next page
12 EN
cordless impact wrench PIWS 10-20V
Selecting the rotational direction
Note
To avoid damaging the gear, only change the rotational
direction when the device is at a standstill.
The motor's rotational direction can be changed by means of
the switch for clockwise/ counter-clockwise rotation(2).
1. Press the switch for clockwise/ counter-clockwise
rotation(2) in all the way on that side towards which the
motor shall rotate.
I. II.
2
I. Screwing in II. Unscrewing
2. Carry out a short test run to see whether the rotational
direction matches the intended application.
A wrong rotational direction may damage the tool and/ or
workpiece.
3. If required, set the switch for clockwise/ counter-
clockwise rotation(2) to centre position (lock) to block the
on/off switch(3).
Switching the device on and off
The device has an infinitely variable speed control. The more
firmly you push the on/off switch(3), the higher is the speed.
1. Check whether the tool and the selected torque setting are
suitable for the intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Press and hold the on/off switch(3) during screwing.
ðThe device operates with the previously selected
settings.
ðThe LED work lamp(14) is illuminated.
3
14
4. Let go of the on/off switch(3) to stop the device.
ðThe LED work lamp(14) goes out.
Info
The motor has an integrated brake that quickly stops
the motor once you let go of the on / off switch(3).
Shutdown
1. Set the switch for clockwise/ counter-clockwise
rotation(2) to centre position(lock).
2. If required, allow the device to cool down.
3. Remove the battery from the device (see Start-up chapter).
4. Remove the tool from the tool holder (see Start-up
chapter).
5. Clean the device according to the Maintenance chapter.
6. Store the device according to the Storage chapter.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PIWS10-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PIWS10-20V in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PIWS10-20V

Trotec PIWS10-20V User Manual - German - 17 pages

Trotec PIWS10-20V User Manual - Dutch - 16 pages

Trotec PIWS10-20V User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info