753339
10
Zoom out
Zoom in
Previous page
1/14
Next page
9 EN
Operating manual – cordless glue gun PGGS 10-3,7V
Automatic switch-off
The automatic switch-off after 10minutes helps you to save
energy during work breaks. Only switch on the device when you
actually use it.
1. Switch the device back on using the on/off switch(2) and
check the status LED or the battery level indication to see
whether the device needs to be charged or heated up.
Gluing
Warning of hot surface
The nozzle might still be hot after use. Glue coming out
of the nozzle can be hot. Risk of burns.
Do not touch the nozzle bare-handed!
Wear protective gloves!
Info
When further glue sticks are pushed in, the device
requires a little more time for heating up than during
initial use. Hardened glue residues can block the feed
channel.
Info
The surfaces to be glued must be clean, dry and free of
grease.
The status LED is illuminated in green.
1. Allow the glue gun to heat up. Push a glue stick suitable for
the material into the feed channel(9) from the rear. Pull the
feed trigger(5) to control the flow of glue for the intended
task.
5
9
2. Apply the glue in dots or lines.
3. Immediately press the two workpieces to be bonded
together for approx.30seconds.
ðAfter approx.5minutes the glue joint will be able to
withstand loads.
4. During work breaks, put the device into the charger.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch off the device.
Hold onto the mains plug while pulling the power cable of
the charger out of the mains socket.
If required, allow the device to cool down.
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PGGS 10 - 3.7V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PGGS 10 - 3.7V in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PGGS 10 - 3.7V

Trotec PGGS 10 - 3.7V User Manual - German - 14 pages

Trotec PGGS 10 - 3.7V User Manual - Dutch - 15 pages

Trotec PGGS 10 - 3.7V User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info