753931
12
Zoom out
Zoom in
Previous page
1/16
Next page
12 EN
cordless compressor and cordless air pump PCPS 10-16V / PCPS 11-16V
Setting the pressure
Info
Please note that the pressure gauge is not calibrated.
1. Press the on/off switch(7) or the power button(36) located
at the display.
ðThe previously set pressure value will be indicated on
the segment display(38) for approx.2s.
ðThen, the current pressure measurement will be
indicated on the segment display(38). If no item is
connected to the compressed-air hose, this value
amounts to0.
2. Press and hold the plus(37) or minus(35) button for
approx. 2s.
ðThe segment display(38) flashes.
3. Use the plus(37) and minus(35) buttons to set the desired
pressure value.
4. Wait until the segment display(38) stops flashing.
ðThe desired pressure value is set.
ðNow the current pressure value will again be indicated
on the segment display(38).
Changing the unit bar/ psi
You can choose whether the pressure is to be indicated in bar or
psi.
üThe device is switched on.
1. Press the power button(36) to switch over between the
units bar and psi.
Switching the cordless compressor on and off
Info
Please note that the pressure gauge is not calibrated.
Info
The compressor is only in operation when the display
is switched on.
1. Check whether the applied valve adapter and the set
pressure value are suitable for the intended application.
2. Press the on/off switch(7) or the power button(36) located
at the display.
ðThe previously set pressure value will be indicated on
the segment display(38) for approx.2s.
ðThen, the current pressure measurement will be
indicated on the segment display(38). If no item is
connected to the compressed-air hose, this value
amounts to0.
3. Connect the compressed-air hose to the item to be inflated
by means of the mounted valve adapter.
ðThe pressure of the connected item will be indicated on
the segment display(38).
4. Adjust the desired pressure value if required (see chapter
Setting the pressure).
5. Press the on/off switch(7) and hold it during operation.
ðThe LED work lamp(8) is illuminated.
ðThe cordless compressor will be switched off upon
reaching the set pressure level.
7
6. Let go of the on/off switch(7) to stop the device.
ðThe LED work lamp(8) goes out.
7
7. To switch the device off, press and hold the power
button(36) at the display for approx. 3s.
8. Remove the compressed-air hose or the valve adapter.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PCPS 11-16V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PCPS 11-16V in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PCPS 11-16V

Trotec PCPS 11-16V User Manual - German - 18 pages

Trotec PCPS 11-16V User Manual - Dutch - 17 pages

Trotec PCPS 11-16V User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info