688812
21
Zoom out
Zoom in
Previous page
1/23
Next page
EN 21
local air conditioner PAC 2010 E / PAC 2610 E
Condensate discharge (manual draining)
In cooling and dehumidification mode condensate is formed,
which is mostly discharged via the exhaust air.
The remaining condensate is collected in a container within the
housing. The condensate ought to be drained regularly.
If too much condensate accumulates, the device switches off
and indicates this via the H8 indication on the segment
display(13).
1. Carefully transport or wheel the device to a suitable
location for discharging the condensate (e.g. a drain) or
position a suitable collection container underneath the
lower condensate outlet.
2. Remove the rubber stopper from the condensation drain
hose.
3. Detach the condensation drain hose from the retaining clip
and guide the hose to a drain or collection container. To
ensure that the condensate can run off, the hose must not
be kinked, nor should it have to overcome an uphill incline
towards the drain.
4. Let the condensate run, until the condensation drain hose
is completely drained.
5. Reattach the rubber stopper to the condensation drain
hose and put the hose back into the retaining clip. Ensure
the tight fit of the rubber stopper, for otherwise there might
be uncontrolled water leakage.
ð The H8 error code on the segment display(13) will
disappear as soon as the condensate has been drained.
Activities required after maintenance
If you want to continue using the device:
Leave the device to rest for at least 6hours, so the
refrigerant can accumulate within the compressor. Wait
6hours before switching the device back on! Acting
contrary might lead to compressor damage and a
malfunctioning device. If so, any warranty claims will be
voided.
Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
Store the device according to the Storage chapter.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAC2010E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAC2010E in the language / languages: English as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAC2010E

Trotec PAC2010E User Manual - German - 23 pages

Trotec PAC2010E User Manual - Dutch - 23 pages

Trotec PAC2010E User Manual - French - 23 pages

Trotec PAC2010E User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info