756400
5
Zoom out
Zoom in
Previous page
1/8
Next page
EN 5
food thermometer BP2F
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
When transporting the device, ensure dry conditions and and
protect the device from external influences e.g. by using a
suitable bag.
Storage
When the device is not being used, observe the following
storage conditions:
dry and protected from frost and heat
protected from dust and direct sunlight
The storage temperature is the same as the range given in
the Technical data chapter.
Remove the batteries from the device.
Operation
Note
Make sure that the surface of the device is dry and the
device is switched off.
Inserting the battery
1. Remove the screw from the battery compartment.
2. Remove the cover from the battery compartment.
3. Insert the batteries with correct polarity.
4. Reattach the cover to the battery compartment.
5. Fasten the battery compartment cover with the screw.
Note:
Note that moving from a cold area to a warm area can lead to
condensation forming on the device's circuit board. This
physical and unavoidable effect can falsify the measurement. In
this case, the display shows either no measured values or they
are incorrect. Wait a few minutes until the device has become
adjusted to the changed conditions before carrying out a
measurement.
Temperature measurement with infrared sensor
Info
Vapours and smoke can influence the measurement.
Info
Ensure that the surface to be measured is free of dust,
dirt, ice or similar substances.
Info
To be able to gain exact measurement results on
surfaces which reflect heavily, stick matt masking tape
to the surface or apply matt black paint with a very
high and known degree of emission.
Info
Note the 4:1 ratio of the distance to the measuring spot
diameter. The larger the distance to the object, the
larger the measuring spot diameter and hence, the less
precise the measured result.
1. Point the device at the object to be measured and hold
down the Scan button(4).
ðThe currently measured value is indicated.
ðThe IR measurement indication flashes.
ðThe IR temperature indication appears on the display.
2. Let go of the Scan button(4) to terminate the
measurement.
ðThe most recent measured value is frozen and indicated
on the display for approx.7s.
ðThe Hold indication is shown on the display.
ðThe IR measurement indication disappears.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BP2F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BP2F in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BP2F

Trotec BP2F User Manual - German - 8 pages

Trotec BP2F User Manual - Dutch - 8 pages

Trotec BP2F User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info