753934
10
Zoom out
Zoom in
Previous page
1/12
Next page
10 EN
laser distance measuring device BD 11
Maintenance and repair
Charging the battery
The battery should be charged when the battery is low. The
battery power is shown on the display(6) in the battery status
indication(16). Proceed as follows:
1. Open the rubber side cover.
2. Connect the mini USB cable to the device.
3. The charging symbol(15) is shown on the display(6).
When the battery is fully charged, the battery symbol in the
battery status indication(16) is completely green.
Cleaning
Clean the device with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Do not use any
sprays, solvents, alcohol-based cleaning agents or abrasive
cleaners, but only clean water to moisten the cloth.
Repair
Do not modify the device or install any spare parts. For repairs
or device testing, contact the manufacturer.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Icon Cause Remedy
The battery is
almost empty.
Recharge the battery.
Calculation error Repeat the measurement. Pay
attention to the measurement
sequence and position of the
device.
The temperature is
too high.
Allow the device to cool down.
Observe the permissible
operating temperature according
to the Technical data chapter.
The temperature is
too low.
Allow the device to warm up.
Observe the permissible
operating temperature according
to the Technical data chapter.
The reception of the
reflected signal is
too strong or too
weak.
Repeat the measurement on
another surface with better
reflective properties or use a
target plate.
The ambient light is
too intense.
Change the ambient light
conditions for the measurement.
ERROR
Hardware fault Repeatedly switch the device on
and off. If the symbol does not
disappear, please contact your
retailer.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BD11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BD11 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BD11

Trotec BD11 User Manual - German - 12 pages

Trotec BD11 User Manual - Dutch - 12 pages

Trotec BD11 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info