782775
4
Zoom out
Zoom in
Previous page
1/20
Next page
4
Gewöhnung:
Einige Tiere brauchen etwas Zeit, um sich an den neuen Futterautomaten zu gewöhnen.
Wir empfehlen daher Folgendes:
Stellen Sie den Futterautomaten, ohne ihn einzuschalten neben den Futternapf Ihres
Hundes bzw. Ihrer Katze.
Füllen Sie anfangs den aktuellen Napf sowie den Napf des Futterautomaten mit Futter.
Wenn sich Ihr Tier an den Futterautomaten gewöhnt hat, können Sie den normalen Napf
wegstellen.
Um die Neugier Ihres Tieres auf den Futterautomaten zu wecken, sollten Sie zu Beginn
regelmäßig einige Leckerlis in den Napf legen.
Reinigung:
Schalten Sie den Futterautomaten aus und trennen Sie ihn vom Strom. Nehmen Sie die
Futterschale heraus. Dazu müssen Sie die Knöpfe rechts und links drücken, welche die
Schale lösen. Den Futterbehälter können Sie einfach nach oben herausziehen. Sie können
die Teile mit Wasser reinigen (nicht spülmaschinengeeignet). Die Station sollte nicht mit
Wasser gereinigt, sondern nur feucht abgewischt werden. Bevor Sie neues Futter einfüllen,
sollten Futterbehälter und Napf komplett trocken sein.
E Instructions
Read the instructions before using the device.
Please Note:
The automatic feed dispenser is only suitable for dry feed (diameter 5-15 mm).
Always use the automatic feed dispenser with feed container and lid.
Do not use this device for puppies and kittens under 7 months.
Place the automatic feed dispenser on level ground.
The automatic feed dispenser is only suitable for indoor use.
Do not let your pet to chew on the feed dispenser or on the cable. If necessary, protect the
cable with a cable guard.
Before using the automatic feed dispenser:
Before using the automatic feed dispenser, plug it into the mains supply or insert 3
D-mono batteries. Turn on the main switch at the base. The lid is opened by pressing
the button on the lock. Now open the automatic feed dispenser. Fill the automatic feed
dispenser with dry feed.
Button Lock:
Press SET for a few second to either release the button lock or set it. If nothing is selected,
the button lock will be activated of its own accord after a few seconds.
Setting the time:
1. Press SET. Now the hour flashes. Use the arrow keys to select the right hour and save with
SET.
2. Now the minutes flash. Select the minutes and confirm by pressing SET.
Programming the feeding time:
1. After setting the clock, the hour and MEAL 1 should be flashing. Now you can choose the
time for the first feed in the same way as you set the clock and confirm with SET.
2. Now the selection of portions for the preselected feeding time appears. Choose the
portion size with the arrow keys (1 portion = 24 ml) and confirm with SET.
3. Repeat these steps for all 4 feeding times. If you want fewer feeding times, press SET for
about 3 seconds after your last feeding time. The feeding times are saved.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trixie TX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trixie TX8 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info