665184

Triton WRA 001 Manual

2
Zoom out
Zoom in
Previous page
1/8
Next page
2
GB
The bottom of the Upright (B) has a small screw
hole 13mm from the end. Tighten a Screw (A) into
this hole, then slide a Rack (C) down the upright
until it locates onto the screw. The notched side of
the rack (circled) must face down.
Tighten a screw into the next hole up, then slide
another rack into position. Continue this until all
racks are fitted. For alternative rack positions drill
additional 2.5mm holes. Repeat steps 1 and 2 for
the remaining upright and racks.
Find a solid mounting location and ensure you are
fixing to structural supports when mounting. Space
the uprights around 1200mm to 1800mm (4' to
6') apart. For storage of very long materials use
additional WoodRacks.
Fit the Spacers (D) over the mounting holes,
as shown, and fasten to the wall using the
recommended fasteners (not supplied) as outlined
in Steps 4, 5 or 6.
Mounting to Masonry: Use 6mm masonry
anchors suitable for fixing 30-40mm thickness.
Storing small items: Construct a simple shelf for
any of the levels as shown.
Mounting to timber: Use 5.5mm hex head wood
screws, at least 65mm. Where required install
vertical supports.
Outside use: For weather protection staple
horizontal battens to a plastic sheet, then fix the
top batten above the racks.
Mounting to a steel shed: Ensure racks are
mounted to structural framework. If steel use a
min. 6mm bolts. If wood, refer to Fig.5. Install floor
to roof verticals if required-secure to the steel
sheet with fasteners every 300mm
Assembly
ASSEMBLY
Fig: 1
Fig: 2
Fig: 3
Fig: 4
Fig: 5
Fig: 6
PARTS LIST
A. Screws (12)
B. Uprights (2)
C. Racks (12)
D. Spacers (6)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triton WRA 001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triton WRA 001 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info