5
GB
WARNING:
time of exposure if necessary.
stop using the tool immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition.
If necessary,
gloves. Do not operate the tool with hands below a normal comfortable temperature,
as vibration will have a greater effect. Use the figures provided in the specification
relating to vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to international
standards.
maintained, incorrectly assembled,
and vibration. www
the workplace that may be useful to domestic users who use tools for long periods of time.
General P
WARNING: Read all safety warnings,
specifications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury
Save all warnings and instructions for future reference.
The term “power tool”
(corded) power tool or battery-operated (cordless) po
1)
a) Cluttered or dark areas invite accidents.
b)
as in the presence of flammable liquids,P
tools create sparks which may ignite the dust or fumes.
c)
tool. Distractions can cause you to lose control.
2)
a)
way
Unmodified plugs and matching outlets will reduce risk of electric shock.
b)
pipes, radiators,There is an increased
risk of electric shock if your body is earthed or grounded.
c) Water
entering a power tool will increase the risk of electric shock.
d)
the power tool. Keep cord away from heat,
Damaged or entangled cords increase the risk of electric shock.
e)
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f)
device (RCD) protected supplyUse of an RCD reduces the risk of electric shock.
3) Personal safety
a)
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.A moment of ina
while operating power tools may result in serious personal injury.
b) Protective
equipment such as dust mask, non-skid safety shoes,
protection used for appropriate conditions will reduce personal injuries.
c)
before connecting to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your finger on the switch
or energising power tools that have the switch on invites accidents.
d) A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) This
enables better control of the power tool in unexpected situations.
f) Keep
your hair
jewellery or long hair can be caught in moving parts.
g)
collection facilities,
used. Use of dust collection can reduce dust-related hazards.
4)
a) The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c)
tool before making any adjustments, changing accessories,
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d)
persons unfamiliar with the power tool or these instructions to operate the
power tool. P
e)
parts, breakage of parts and any other condition that may affect the
power tool’s operation.
use. Many accidents are caused by poorly maintained power tools.
f) Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g)
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
h)
and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
WARNING: When used in
supplied via Residual Current Device (RCD) with a rated residual current of 30mA or less.
5) Service
a)
replacement parts. This will ensure that the safety of the power tool is maintained.
Additional Safety for Electric Planers
WARNING!
• Wait for the cutter to stop before setting the tool down.An exposed rotating cutter
may engage the surface leading to possible loss of control and serious injury.
• Hold the power tool by insulated gripping surfaces only
may contact its own cord. Cutting a
parts of the power tool ‘live’ and could give the operator an electric shock.
• Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the work by your hand or
against the body leaves it unstable and may lead to loss of control.
• If the replacement of the supply cord is necessary,
the manufacturer or their agent in order to avoid a safety hazard.
• It is strongly recommended that the tool always be supplied via a residual
current device with a rated residual current of 30mA or less.
• Use appropriate respiratory protection: Use of this tool can generate dust
containing chemicals known to cause cancer
harm. Some wood contains preservatives such as copper chromium arsenate
(CCA) which can be toxic.
extra care should be taken to avoid inhalation and minimise skin contact.
IMPORT
• Use suitable detectors to determine if utility lines are hidden in the work
area or call the local utility company for assistance. Contact with electric lines
can lead to fire and electric shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or may cause an electric shock.
• Do not reach into the chip ejector with your hands.
They could be injured by rotating parts.
• A dust mask and dust extraction system are strongly recommended
during usage to protect the operator against dust. Electric planers generate
a large quantity of dust and some materials will produce toxic dust.
• Use only sharp blades. Handle the blades very carefully.
a)
b)
the task. Otherwise,
c)
the work area. T
d)
Sound and vibration information
Sound pressure L
PA
87.1dB(A)
Sound power L
WA
98.1dB(A)
Uncertainty K 3dB(A)
Weighted vibration a
h
(main handle) 9.326m/s
2
Weighted vibration a
h
(auxiliary handle) 7.727m/s
2
Uncertainty K 1.5m/s
2
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
As part of our ongoing development, specifications of TRITON products may alter without notice.
837520_Manual .indd 5 28/02/2017 12:31
