530987
17
Zoom out
Zoom in
Previous page
1/20
Next page
17
WARNING: In order to prevent fire hazard, electric shock or personal injury, you have
to follow these safety instructions:
Only use a grounded socket.
Do not remove the grounded lead.
Do not use an adapter.
Do not use an extension lead.
Switch off electricity during maintenance.
Do not pull the cord if you want to switch on or switch off the electricity.
Electricity requirements
VOLTAGE: alternating current 230V; 50 Hz; 180 W
Location requirements
During transport, the angle of the ice machine should be below 45 degrees.
Do not place the ice machine upside down; this may cause problems with
the compressor and the closed systems.
The ice machine must be placed on a horizontal, flat surface.
In order to ensure proper ventilation of the ice machine, you have to have
150 mm of free space above, behind and to the sides of the ice machine.
Before you use the ice machine for the first time, it is recommended that
you wait for 2 hours after placing the ice machine at the chosen location.
Regularly clean the internal reservoir, the ice storage container, the water
tank, the ice cube tray and the evaporator.
Instructions for use
Start the ice machine.
STEP 1. Open the lid and fill the water tank with water. See to it that the level of
the water tank does not exceed the storage space for ice cubes.
STEP 2. Push the START button to switch on the machine.
STEP 3. Select the size of the ice cubes by pushing the ice size selection
button.
The ice machine will start operating.
Operation of the ice machine
1. Ice production goes as follows:
Water is pumped from the water tank to the water container. This will take
approximately 40 seconds.
The cycle for ice production starts. The evaporator in the water container
starts making ice on the fingers of the freezer element.
Running the cycle takes approximately 1 to 8 minutes (depending on the
ice choice). After ice production has been completed, the ice tray will tip
forward: the remaining water will flow back to the water tank and the ice
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar YM-2605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar YM-2605 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info