488615
4
Zoom out
Zoom in
Previous page
1/40
Next page
1
2
3
4
Unplug the appliance from the socket when you are not using it.
Note: To avoid danger by accidental resetting the thermal protection,
this appliance may not be powered through an external switching
device, such as a timer, or connected to a circuit that regularly will be
switched on or o.
Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
Make sure the cord does not touch the hot parts of the appliance.
We advise to place a heat resistant coating between your table and the
appliance (this way you don't get burns on your table or table cloth).
Do not use this appliance in the bathroom or near a sink lled with
water. If this appliance has fallen into the water do not under no
circumstances directly grab this appliance, but rst pull the plug from
the socket.
* Competent qualied repair service: after sales department of the producer
or importer or any person who is qualied, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.
PARTS DESCRIPTION
1. Thermostat
2. Control lights
3. Baking plates
BEFORE THE FIRST USE
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage
of your home. Rated voltage : AC220-240V 50Hz, max. rated power
1000 Watt.
Before you start baking for the rst time, grease the non-stick coated
baking trays lightly with a small amount of oil or fat.
Let the appliance heat up for about 5 minutes with the device closed,
without any content and the temperature control on the highest
setting. This will remove the smell encountered when rst switching on
a wae maker. Please ensure sucient ventilation.
Clean the wae maker afterwards as described in Cleaning and Care.
HOW TO USE YOUR WAFFLE MAKER
Insert the plug into the wall socket. The red light goes on.
After a short warm-up period of approx. 5 minutes with the plates
closed (the green light goes on) the wae maker is ready for use.
Open the wae maker and grease both baking plates with some oil or
fat.
Place the prepared wae dough on the lower baking tray.
Set the temperature control to the desired setting. For a dark and crispy
wae, you can use mode 3, 4 or 5. For a light and soft wae you can
use position 1 or 2. Choose your own setting.
The baking time in every setting is 3 to 5 minutes, depending on the
kind of dough and your own wishes.
Do not use sharp objects to remove your wae, in order to prevent
damage to the non stick coating.
Remove the plug from the wall socket after use.
Instruction manual
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar WF-2118 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar WF-2118 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info