improperlyinstalledfilterordustbagmaydamagethe unit.
USE
•Connect the different nozzle tools/floor brush to the tube for different
cleaning purposes. The floor brush has two positions, soft/textile
surfaces. The combo nozzle is for narrow surfaces.
•Turn on the appliance: Hold the plug and pull out the cord, then insert
the plug into the power socket. Make sure that the power supply
corresponds to the required power mentioned on the rating label.
Press the on/off switch pedal to turn on the power.
•Turn off the appliance: After use, press the on/off switch pedal, the
appliance is turned off. Pull the plug out of the power socket, press the
cord rewinding pedal, the power cord will be drawn in.
•To move the appliance from room to room, unplug and carry it by
using the handle. Never pull the appliance by its cord when moving
CLEANING AND MAINTENANCE
•The plug must be removed from the power socket before any
maintenance or replacement.
•The motor protection filter(as found under the front cover) should be
removed and rinsed twice a year or whenever it is visible clogged. If
the filter is damaged, a new filter should be replaced.
•The exhausted filter should be cleaned in time. Unclip the grille and
shake the filter to clean any dust accumulated. Then relocate the filter
and clip the grille.
•Open the dust bin by pressing the lock and pulling the lid towards you.
•Remove the dust and debris from the dust bin.
Placing the bagless accessory
•Open the front cover by pressing the lock clip.
•Remove the plastic (filter)frame from the dust bag compartment.
•Insert the bagless accessory with the handle up in the dust bag
compartment.
•Push the handle down.
•Close the front cover.
Placing the dust bag
•Open the front cover by pressing the lock clip.
•Lift off the Paper bag from the dust bag holder. Please always keep the
dust inlet pointing upwards in order to void dust leakage.
•Replace the dust bag and install a new dust bag to the holder. Make sure
the card of dust bag reaches the bottom of the dust bag holder.
•Close the front cover.
ENVIRONMENT
This appliance should not be put into the domestic garbage at the
end of its durability, but must be offered at a central point for the recycling
of electric and electronic domestic appliances. This symbol on the
appliance, instruction manual and packaging puts your attention to this
important issue. The materials used in this appliance can be recycled. By
recycling of used domestic appliances you contribute an important push to
the protection of our environment. Ask your local authorities for information
regarding the point of recollection.
Support
You can find all available information and spare parts at www.tristar.eu!
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Tristar SZ-1932 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Tristar SZ-1932 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.
The manual is 30.3 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
