457527
5
Zoom out
Zoom in
Previous page
1/39
Next page
9
Operation and maintenance
UK
Remove all packaging of the device. Remove the plastic layer of the soleplate (no. 9).
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz.
Filling your iron with water
Before filling water, please pull out the power cord out off the wall outlet and turn the
thermostat (No.1) to the MIN position. Fill the water tank (No. 8) with cold tap water to
maximum level, please be aware not to overfill.
Never add other liquids to the water!
The radius of the exhaust steam is very powerful, so make sure you do not focus on people,
pets or delicate points.
Use of your iron without steam
Turn the steam switch (No. 3) to the O position.
Set the thermostat switch (No. 1) on the iron to the desired position from MIN to MAX.
On the label in your garment you can find the correct thermostat position which is
appropiate for the garment. See the schedule for the meaning of the thermostat standings.
To remove stubborn wrinkles, you can press the spray button (No. 6) to bring your ironing to
moisten.
Use of your iron with steam
Turn the steam switch (No. 3) to position
for maximum steam or turn the steam switch (No. 3) to the right for less steam.
Set the thermostat switch (No. 1) on the iron to the desired position of MIN to MAX.
On the label in your garment, you can find the correct thermostat position which is appropiate
for the garment. See the schedule for the meaning of the thermostat standings.
Press the steam button (No. 7) to iron with steam.
To remove stubborn wrinkles, you can press the spray button (No. 6) to bring your ironing to
moisten. For an extra boost of steam press again the steambutton (No. 7).
GARMENT
LABEL
FABRIC
TYPE
THERMOSTAT
REGULATION
Synthetic
·Low
temperature
Silk - Wool
··Med
temperature
Cotton -
linen
··MAX
temperature
Fabric not to be ironed
10
To clean your iron
The following procedure is intended for daily use of the device, every 14 days to be conducted.
Fill the water tank (No. 8) with cold tap water.
Insert the plug into the wall outlet and set the thermostat (No. 1) to the MAX position.
Hold the iron above the sink.
Turn the steam switch (No.3) to position and press repeatedly the
steambutton (No. 7).
The steam holes in the soleplate (No. 9) are cleaned.
Turn the thermostat (No. 1) to the MIN-position and turn the steam switch (No. 7) to
the O position.
Dry the iron with a soft cloth. Note the soleplate (No. 9) is hot!
You should remove all the water before you store the iron.
Attention! The iron is very hot do not touch
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar ST-8142 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar ST-8142 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info