657366
4
Zoom out
Zoom in
Previous page
1/60
Next page
4
Instruction manual
BEFORE THE FIRST USE
Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
Before using your appliance for the rst time, wipe o all removable
parts with a damp cloth. Never use abrasive products.
Place the device on a at stable surface and ensure a minimum of
20 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
Put the power cable into the socket. (Note: Make sure the voltage
which is indicated on the device matches the local voltage before
connecting the device. Voltage 220V-240V 50/60Hz)
OPERATION
Display
When the unit is plugged in, it will indicate the room humidity level.
When you set the humidity, it will indicate the humidity that you have
selected.
When you program the time for the unit to turn on and o, it will show
the hours.
When the environment humidity is lower than 35%, it will show “LO”
When the environment humidity is higher than 95%, it will show “HI”
Operating instructions
Press the Power button once to start operation. Press it again to stop
operation.
Press the up or down button to set the desired humidity level in the
room, which can be set from 30% to 90% at 5% intervals. After a period
of working, when the environment humidity is lower than the selected
humidity by 2%, the compressor will stop and fan stops working 3
minutes later; When the environment humidity is equal to or higher
than the selected humidity by 3%, the compressor will restart once the
3-minute compressor protection time is over.
Press the timer button to program the time when the unit turns on and
turns o. If you want to cancel the timer programming, press the timer
button to adjust the time at 00, and press the timer button, it will be
circulate from 00-01-02……23-24. It is the programmed time to switch
the machine. The programmed time will be cancelled if you switch the
compressor. The programmed time remains unchanged if the machine
stops to work due to water full or during defrosting
Press the laundry button to open and close Laundry function.
Draining the collected water
When the drainage tank is full, the tank full indicator light will turn on,
the operation will stop automatically and the buzzer will beep 15 times to
alert the user, that the water need to be emptied from the drainage tank.
4


Need help? Post your question in this forum.

Forumrules
1

Forum

tristar-ac-5420

Reset search

  • Hi, my question would be the following on the led screen clarification of meanings: e-1, e-2, e-3 ..., and so on.
    thank you. Submitted on 17-3-2021 at 13:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar AC-5420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar AC-5420 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info