Manual Trebs 99732 (page 43 of 44) (English, German, Dutch, French)

569439

Zoom out

Zoom in

1/44

OPERATION INSTRUCTION

Inaccurate measurement may result from the following:

 When the battery runs out: at this time, the “ ” icon will continuously appear on LCD

to remind you to replace the battery.

 When the measured distance is out of the specified range: the effective range is 2′~53′

(0.6~16m).

 When the calculated result is out of the specified range: at this time, an error message

“Err” will be displayed on the lower line of the screen.

 When addition of different parameters (e.g. length plus area), the “+” will be ignored

and the screen will keep the same read as the unit was operated before.

 When another ultrasonic source or high frequency noise is nearby: leave or shut down

the noise resource when taking measurement.

 When barriers appear between the tool and the measured surface.

 When the measured surface is not smooth: the measured surface should be smooth,

hard and of homogeneity.

 When the measuring environment is not good: the temperature and humidity will affect

the accuracy of measurement, and take measurement under environment of no wind,

and temperature of the unit should be same with temperature of the circumstance,

especially for long distance measuring (between 40’ to 53’/ 12m to 16m), the relative

humidity should be above 48%, and the size of measured surface should be at least 10ft.

by 10ft./3m by 3m.

 When measuring, ultrasonic sensor aperture should straightly face to the measured

surface.

Cautions

 Handle with care and do not let the tool drop down.

 Do not disassemble the tool to avoid failure.

 Keep the tool dry and clean.

 Store the tool in the case when not in use.

 Avoid dust and water, which may stain the lens.

 Check battery regularly in case of its deterioration.

 Remove the battery when not in use for an extended period of time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trebs 99732 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trebs 99732 Manual

Product: