154064
70
Zoom out
Zoom in
Previous page
1/73
Next page
Cannot enter the RECORD Mode
Troubleshooting Troubleshooting
To make sure the recorded file will not be lost, two safety mechanisms are provided.
1. If the remaining battery capacity is less than 10%, you cannot enter the RECORD Mode.
2. During recording, if the remaining battery capacity goes below 10% the MP840 will automatically
save the recording.
Track playback sounds intermittent
Plug the earphones into the earphones jack again to make sure they are properly connected.
MP840 Powers OFF automatically
MP840 features a SLEEP Mode, which acts as a Power Saving feature. You can preset your MP840 to
Power OFF automatically after 15, 30, or 60 minutes. Please refer to the “
Sleep” section in SETTINGS.
MP840 just isn’t working properly
If your MP840 ever stops working properly, or locks up, try Powering it ON and OFF a few times, if this
does not correct the problem you can
Reset the unit by pressing the “Reset” button for 3 to 5
seconds. If all of these options fail you can restore your
MP840 to its Default Factory Settings by using the
Recovery Function.”
Cannot find the file that was just copied to the MP840
Re-copy the file and refer to the “Disconnecting from a Computer” section to remove the MP840 after
the copy process is completed.
A File that was just deleted still appears
Re-delete the file and refer to the “Disconnecting from a Computer” section to remove the MP840 after
the delete process is completed.
MP840 automatically removed from the operating system
This problem occurs when you press the “Volume Down” button - while your MP840 is still connected
to a Computer USB port. Unplug your
MP840 from the USB port and plug it back in again.
MP840 cannot operate after it was formatted in Windows
®
Formatting the MP840 using the “Quick Format,” or “Full Format” option in Windows
®
erases the default
format of the
MP840. To retrieve the default format, you must link to http://www.transcendusa.com/ and
download a Firmware Update for your
MP840.
How do I find out what Windows Media Player version I am using?
1. Open your Windows Media Player program.
2. Click on the “Help” menu and select the “About Windows Media Player” option.
3. The version of your Windows Media Player will be displayed on the computer screen.
Cannot listen to DRM music on my MP840?
1. The MP840 only supports WMA-DRM10 music files, is this the file type you are using?
2. You must use Windows Media Player 10 to transfer and synchronize your WMA-DRM10 music files
with the
MP840’s MTP Folder.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Transcend t sonic 840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Transcend t sonic 840 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info