664641
1
Zoom out
Zoom in
Previous page
1/2
Next page
Connect the NC450 and your smartphone
to the same router, then connect the power
cord and internet cord to the NC450. If the
cord is long enough, please use Method A
below. If not, use a Passive PoE Injector to
connect, as shown in Method B.
Place the camera where you want it. You can
place it on a at surface, or mount it as shown
on the back of this guide.
Download the tpCamera app. Once installed,
open it and follow the instructions to add
the camera to your TP-Link ID.
View live video using the tpCamera
app or TP-Link Cloud website.
Via tpCamera: On the "My Cam" screen,
tap your camera to view video. Change the
camera angle using the pan and tilt
controls.
Via TP-Link Cloud website: Log in at
https://www.tplinkcloud.com and select
your camera to view live video.
Quick Installation Guide
Flashing red: System starting
Solid red: Network not connected
Solid green: Network connected
System LED
OR
Short Press to trigger WPS; Press and
hold for 5 seconds to trigger Reset.
More functions with tpCamera
Get notications when motion is
detected, and view alerts history.
Stay in touch with 2-way audio.
View all of your cameras on one screen by
downloading the TP-Link Camera Control
utility. See the Camera Control User Guide
for more details. Or visit us online at
www.tp-link.com for Camera Control utility,
Firmware, and other support.
Connect Register Relocate View and Enjoy
WPS (Wi-Fi Protected Setup): If your Wi-Fi
router supports WPS, you can connect the
camera to your Wi-Fi network using WPS.
For details, see the camera’s User Guide.
The WPS/Reset Button Mounting Kit
Wall Mounting
Place the paper drill guide where you want
the camera. Check the alignment using
a level. Using a 0.24 inch (6mm) drill bit, drill
holes through the two circles on the guide.
Remove the paper.
Insert the two anchors into the holes and
place the camera mount over the anchor.
Attach the camera and use the screws to
secure it.
Mount Base Secure Camera
1
2
3
1
2
3
Drill Holes
Mount Base Secure Camera
1 2 3
1 2 3 4
1 2 3
Drill Holes
Camera
Ceiling mount kit
Base
Wall mount kit
Ceiling Mounting
Place the paper drill guide where you want
the camera*. Using a 0.24 inch (6mm) drill
bit, drill holes through the two circles
on the guide. Remove the paper.
* Camera placement can aect viewing angle. For best
results, place the camera near a wall or corner.
Attach the camera mount using the
screws, washers and wingnuts.
Attach the camera and use the screws to
secure it.
Camera
Passive
POE
Injector
Outlet
Wireless Router
Smartphone
LANWAN
Internet
Camera
Outlet
A B
WPS/
RESET
For technical support and other information,
please visit http://www.tp-link.com/support.
Support
©2017 TP-Link
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP Link NC450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP Link NC450 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP Link NC450

TP Link NC450 Quick start guide - English - 74 pages

TP Link NC450 User Manual - English - 49 pages

TP Link NC450 Quick start guide - German, Dutch, Danish, French, Italian, Portuguese, Swedish, Portuguese, Spanish, Norwegian, Finnish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info