650607
15
Zoom out
Zoom in
Previous page
1/18
Next page
9. Tighten the four (4) wing nuts around the wick adjuster.
10. Turn the wick adjuster knob to be sure the wick moves smoothly up and down.
AFTER REPLACING THE WICK, CHECK THE OPERATlON OF THE AUTOMATlC
EXTINGUISHER.
Wick height on position 1 of the wick life extender should be 8 mm (5/16 in.) when
wick adjuster knob is turned fully cIockwise. Be sure to check.
NOTE: Remember always to start a new wick on position 1 of the wick life
extender.
NOTE: lf wick does not move smoothly and easily, or wick height on position 1 of
the wick life extender is not in the range of 7-9 mm (9/32-5/16 in.).
DO NOT use heater. Disassemble and repeat items 5 through 10.
NOTE: lf any ragged edges appear on the top of the wick, trim them with a
scissors carefully. DO NOT cut the body of the wick.
11. Replace the outer cover on the fuel tank and secure it into position with three (3)
screws by using the screwdriver. Replace batteries in the battery holder.
12. Once again, check the proper operation of the automatic extinguisher.
NOTE: Before lighting a new wick for the first time, turn the wick to its lowest
position and allow the wick to saturate with kerosene (paraffin) for about
thirty (30) minutes.
14
Omni 230 Type C_US.qxd 14.8.1 13:15 ページ 14
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyotomi Omni 230 - type C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyotomi Omni 230 - type C in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info